2020 Mercedes-Benz Sprinter 2500 Cargo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 Mercedes-Benz Sprinter 2500 Cargo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 30-50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2020 Sprinter 2500 Cargo — Year-Specific Fitment Context
The 2020 model year marks the beginning of the Mercedes-Benz Sprinter 2500 Cargo's 5x112 bolt pattern era, which continued through 2024 (5 consecutive years). Wheels from any 2020–2024 Mercedes-Benz Sprinter 2500 Cargo are cross-compatible with the 2020 model. Note: the 2019 model used a different pattern (6x130), so its wheels are NOT interchangeable with the 2020. Across its full production run (2011–2024), the Sprinter 2500 Cargo has also used: 6x130.
Mercedes-Benz Sprinter 2500 Cargo Bolt Pattern by Year
The table below shows how the Sprinter 2500 Cargo's wheel specifications have changed over the years. The 2020 model year is highlighted.
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2020 Mercedes-Benz Sprinter 2500 Cargo
For the 2020 Mercedes-Benz Sprinter 2500 Cargo, the bolt pattern is 5x112 with a center bore of 66.6mm. When selecting aftermarket wheels, hub-centric rings are essential to ensure proper load distribution and prevent vibrations. The offset range is 30-50mm; deviating outside this can cause rubbing or clearance issues with suspension and brakes. Always use lug nuts with the correct thread pitch (14x1.5) and seat type—either cone or ball seat, depending on the wheel. Mismatched lug nuts can lead to wheel loosening. Verify that the wheel's load rating meets or exceeds the vehicle's requirements for safe operation.
Historical Fitment Data Reference
In our dataset, Mercedes-Benz Sprinter 2500 Cargo appears from 2011 to 2024 (13 model years). Across model years, this model appears with 2 bolt patterns (5x112, 6x130).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 100.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain proper clamping force.
- ✅ Avoid using wheels from pre-2020 Sprinters (6x130 pattern) as they are not compatible.
- ✅ Check wheel clearance with the brake calipers, especially for larger aftermarket wheels.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2020 Mercedes-Benz Sprinter 2500 Cargo — Frequently Asked Questions
What is the bolt pattern for a 2020 Mercedes-Benz Sprinter 2500 Cargo?
The 2020 Mercedes-Benz Sprinter 2500 Cargo uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 30-50mm.
What other years of Mercedes-Benz Sprinter 2500 Cargo have the same bolt pattern as the 2020?
The Mercedes-Benz Sprinter 2500 Cargo uses the 5x112 pattern from 2020 through 2024. Wheels from any of these model years are dimensionally compatible with the 2020, provided the offset and center bore also match.
Can I use 2019 Mercedes-Benz Sprinter 2500 Cargo wheels on a 2020?
No. The 2019 Sprinter 2500 Cargo used a 6x130 bolt pattern, which differs from the 2020's 5x112. They are not interchangeable.
How tight should I torque the lug nuts on a 2020 Mercedes-Benz Sprinter 2500 Cargo?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What does 30-50mm offset mean for the 2020 Sprinter 2500 Cargo?
An offset of 30-50mm means the wheel's mounting surface is 30-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Mercedes-Benz.
Will wheels from another Mercedes-Benz fit my 2020 Sprinter 2500 Cargo?
Only if they share the exact same 5x112 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.6mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset