2017 Mercedes-Benz Sprinter 2500 Cargo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2017 Mercedes-Benz Sprinter 2500 Cargo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x130 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 84.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2017 Sprinter 2500 Cargo — Year-Specific Fitment Context
The 2017 Mercedes-Benz Sprinter 2500 Cargo is in year 7 of 9 using the 6x130 pattern (2011–2019). Wheels from any 2011–2019 Mercedes-Benz Sprinter 2500 Cargo are cross-compatible with the 2017 model. Across its full production run (2011–2024), the Sprinter 2500 Cargo has also used: 5x112.
Mercedes-Benz Sprinter 2500 Cargo Bolt Pattern by Year
The table below shows how the Sprinter 2500 Cargo's wheel specifications have changed over the years. The 2017 model year is highlighted.
6x130 Pattern Context
This bolt pattern appears on 63 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x130:
Expert Buying Guide for 2017 Mercedes-Benz Sprinter 2500 Cargo
For your 2017 Mercedes-Benz Sprinter 2500 Cargo, the 6x130 bolt pattern and 84.1mm center bore are critical. Aftermarket wheels must have a center bore of at least 84.1mm; use hub-centric rings to avoid vibration. Offset is sensitive: stock is 50mm; deviations beyond ±10mm may cause rubbing or clearance issues. Always use 14x1.5 lug nuts with the correct seat type—Mercedes typically uses ball seat, but confirm your wheel's requirement. Improper lug nut seating can lead to wheel loss. Wheels from 2011–2019 Sprinter 2500 Cargo are direct fit. Avoid 5x112 wheels without adapters.
Historical Fitment Data Reference
In our dataset, Mercedes-Benz Sprinter 2500 Cargo appears from 2011 to 2024 (13 model years). Across model years, this model appears with 2 bolt patterns (5x112, 6x130).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 100.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 130-140 ft-lbs after 50 miles of driving.
- ✅ Verify wheel load rating meets or exceeds the Sprinter's GVWR (typically 8,550 lbs).
- ✅ Check brake caliper clearance; aftermarket wheels with high positive offset may contact calipers.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2017 Mercedes-Benz Sprinter 2500 Cargo — Frequently Asked Questions
What is the bolt pattern for a 2017 Mercedes-Benz Sprinter 2500 Cargo?
The 2017 Mercedes-Benz Sprinter 2500 Cargo uses a 6x130 bolt pattern (also called lug pattern or PCD). The center bore is 84.1mm and the offset is 50mm.
What other years of Mercedes-Benz Sprinter 2500 Cargo have the same bolt pattern as the 2017?
The Mercedes-Benz Sprinter 2500 Cargo uses the 6x130 pattern from 2011 through 2019. Wheels from any of these model years are dimensionally compatible with the 2017, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2017 Mercedes-Benz Sprinter 2500 Cargo?
Absolutely. Just ensure the aftermarket wheels have a 6x130 bolt pattern, an offset near 50mm, and a center bore of at least 84.1mm (using hub rings if larger).
What is the PCD for a 2017 Mercedes-Benz Sprinter 2500 Cargo?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2017 Sprinter 2500 Cargo, the PCD is 6x130.
What lug nut size does the 2017 Mercedes-Benz Sprinter 2500 Cargo use?
The 2017 Mercedes-Benz Sprinter 2500 Cargo uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How do I measure the bolt pattern on my 2017 Mercedes-Benz?
The 2017 Sprinter 2500 Cargo uses a 6x130 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset