2018 Freightliner Sprinter WORKER Cargo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2018 Freightliner Sprinter WORKER Cargo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x130 |
|---|---|
| Lug Nut / Bolt Size | M14x1.5 |
| Center Bore (CB) | 84.1 mm |
| Offset (ET) | 50-60mm |
| Torque Specs | 100 ft-lbs (135 Nm) |
2018 Sprinter WORKER Cargo — Year-Specific Fitment Context
The 2018 model year is the final year of the Freightliner Sprinter WORKER Cargo's 6x130 bolt pattern run (since 2017). Wheels from any 2017–2018 Freightliner Sprinter WORKER Cargo are cross-compatible with the 2018 model.
Freightliner Sprinter WORKER Cargo Bolt Pattern by Year
The table below shows how the Sprinter WORKER Cargo's wheel specifications have changed over the years. The 2018 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2017 | 6x130 | 84.1 | 50-60mm |
| ▸ 2018 | 6x130 | 84.1 | 50-60mm |
6x130 Pattern Context
This bolt pattern appears on 63 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x130:
Expert Buying Guide for 2018 Freightliner Sprinter WORKER Cargo
For the 2018 Freightliner Sprinter WORKER Cargo, the 6x130 bolt pattern and 84.1mm center bore are critical. Aftermarket wheels often have a larger center bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. The offset range is 50-60mm; straying outside this can cause rubbing or clearance issues. Always use M14x1.5 lug nuts with the correct seat type (flat/tapered seat for steel wheels, ball seat for factory alloys). Never mix seat types. Re-torque after 50-100 miles. Verify wheel load rating meets or exceeds the vehicle's GVWR.
Historical Fitment Data Reference
In our dataset, Freightliner Sprinter WORKER Cargo appears from 2017 to 2018 (2 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 110.0 mm
Quick Tips & Safety Warnings
- ✅ Use hub-centric rings (84.1mm ID to aftermarket bore) to avoid vibrations.
- ✅ Re-torque lug nuts to 140-160 ft-lbs after 50-100 miles.
- ✅ Check wheel load rating; Sprinter requires high load capacity (min 3,640 lbs per wheel).
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2018 Freightliner Sprinter WORKER Cargo — Frequently Asked Questions
What is the bolt pattern for a 2018 Freightliner Sprinter WORKER Cargo?
The 2018 Freightliner Sprinter WORKER Cargo uses a 6x130 bolt pattern (also called lug pattern or PCD). The center bore is 84.1mm and the offset is 50-60mmmm.
What other years of Freightliner Sprinter WORKER Cargo have the same bolt pattern as the 2018?
The Freightliner Sprinter WORKER Cargo uses the 6x130 pattern from 2017 through 2018. Wheels from any of these model years are dimensionally compatible with the 2018, provided the offset and center bore also match.
Can I use spacers on my 2018 Freightliner Sprinter WORKER Cargo?
Yes, but ensure the wheel spacers match the 6x130 bolt pattern and 84.1mm center bore. Also verify that you have enough thread engagement for your M14x1.5 hardware.
Will wheels from another Freightliner fit my 2018 Sprinter WORKER Cargo?
Only if they share the exact same 6x130 bolt pattern, a compatible offset, and a center bore equal to or larger than 84.1mm.
What lug nut size does the 2018 Freightliner Sprinter WORKER Cargo use?
The 2018 Freightliner Sprinter WORKER Cargo uses M14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the factory wheel offset for a 2018 Freightliner Sprinter WORKER Cargo?
The OEM offset for the 2018 Sprinter WORKER Cargo is typically around 50-60mmmm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset