2017 Freightliner Sprinter WORKER Cargo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2017 Freightliner Sprinter WORKER Cargo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x130 |
|---|---|
| Lug Nut / Bolt Size | M14x1.5 |
| Center Bore (CB) | 84.1 mm |
| Offset (ET) | 50-60mm |
| Torque Specs | 100 ft-lbs (135 Nm) |
2017 Sprinter WORKER Cargo — Year-Specific Fitment Context
The 2017 model year marks the beginning of the Freightliner Sprinter WORKER Cargo's 6x130 bolt pattern era, which continued through 2018 (2 consecutive years). Wheels from any 2017–2018 Freightliner Sprinter WORKER Cargo are cross-compatible with the 2017 model.
Freightliner Sprinter WORKER Cargo Bolt Pattern by Year
The table below shows how the Sprinter WORKER Cargo's wheel specifications have changed over the years. The 2017 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 2017 | 6x130 | 84.1 | 50-60mm |
| 2018 | 6x130 | 84.1 | 50-60mm |
6x130 Pattern Context
This bolt pattern appears on 63 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x130:
Expert Buying Guide for 2017 Freightliner Sprinter WORKER Cargo
For your 2017 Freightliner Sprinter WORKER Cargo, the 6x130 bolt pattern and 84.1mm center bore are critical. Aftermarket wheels must have a center bore of at least 84.1mm; use hub-centric rings to ensure proper load distribution and prevent vibrations. The offset range is 50-60mm; staying within this range maintains suspension geometry and prevents rubbing. Always use M14x1.5 lug nuts with the correct seat (cone or ball) to avoid loosening. Failure to match these specs compromises safety and drivability.
Historical Fitment Data Reference
In our dataset, Freightliner Sprinter WORKER Cargo appears from 2017 to 2018 (2 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 110.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Verify wheel load rating meets or exceeds the vehicle's GVWR; Sprinter vans are heavy.
- ✅ Avoid wheels with a center bore smaller than 84.1mm; hub-centric rings cannot compensate for a too-small bore.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2017 Freightliner Sprinter WORKER Cargo — Frequently Asked Questions
What is the bolt pattern for a 2017 Freightliner Sprinter WORKER Cargo?
The 2017 Freightliner Sprinter WORKER Cargo uses a 6x130 bolt pattern (also called lug pattern or PCD). The center bore is 84.1mm and the offset is 50-60mmmm.
What other years of Freightliner Sprinter WORKER Cargo have the same bolt pattern as the 2017?
The Freightliner Sprinter WORKER Cargo uses the 6x130 pattern from 2017 through 2018. Wheels from any of these model years are dimensionally compatible with the 2017, provided the offset and center bore also match.
What is the PCD for a 2017 Freightliner Sprinter WORKER Cargo?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2017 Sprinter WORKER Cargo, the PCD is 6x130.
Can I use spacers on my 2017 Freightliner Sprinter WORKER Cargo?
Yes, but ensure the wheel spacers match the 6x130 bolt pattern and 84.1mm center bore. Also verify that you have enough thread engagement for your M14x1.5 hardware.
Do 2017 Freightliner Sprinter WORKER Cargos use lug bolts or lug nuts?
The 2017 Sprinter WORKER Cargo requires M14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the factory wheel offset for a 2017 Freightliner Sprinter WORKER Cargo?
The OEM offset for the 2017 Sprinter WORKER Cargo is typically around 50-60mmmm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset