2024 Mercedes-Benz Sprinter 2500 Cargo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Mercedes-Benz Sprinter 2500 Cargo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 30-50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2024 Sprinter 2500 Cargo — Year-Specific Fitment Context
The 2024 model year is the final year of the Mercedes-Benz Sprinter 2500 Cargo's 5x112 bolt pattern run (since 2020). Wheels from any 2020–2024 Mercedes-Benz Sprinter 2500 Cargo are cross-compatible with the 2024 model. Across its full production run (2011–2024), the Sprinter 2500 Cargo has also used: 6x130.
Mercedes-Benz Sprinter 2500 Cargo Bolt Pattern by Year
The table below shows how the Sprinter 2500 Cargo's wheel specifications have changed over the years. The 2024 model year is highlighted.
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2024 Mercedes-Benz Sprinter 2500 Cargo
For your 2024 Mercedes-Benz Sprinter 2500 Cargo, the critical fitment specs are: bolt pattern 5x112, center bore 66.6mm, offset 30-50mm, and lug nut size 14x1.5. The 66.6mm center bore is hub-centric; aftermarket wheels with a larger bore require hub-centric rings to prevent vibrations and ensure proper load transfer. Offset outside 30-50mm can cause rubbing or clearance issues. Always use correct lug nuts: 14x1.5 thread pitch with either cone or ball seat matching the wheel. Improper seating can lead to wheel loosening. This model is the final year of the 5x112 pattern (2020-2024); wheels from those years are direct fit.
Historical Fitment Data Reference
In our dataset, Mercedes-Benz Sprinter 2500 Cargo appears from 2011 to 2024 (13 model years). Across model years, this model appears with 2 bolt patterns (5x112, 6x130).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 100.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; vibrations and stress on studs may result.
- ✅ Verify wheel load rating meets or exceeds Sprinter's GVWR (typically 8,550 lbs for 2500).
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Mercedes-Benz Sprinter 2500 Cargo — Frequently Asked Questions
What is the bolt pattern for a 2024 Mercedes-Benz Sprinter 2500 Cargo?
The 2024 Mercedes-Benz Sprinter 2500 Cargo uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 30-50mm.
What other years of Mercedes-Benz Sprinter 2500 Cargo have the same bolt pattern as the 2024?
The Mercedes-Benz Sprinter 2500 Cargo uses the 5x112 pattern from 2020 through 2024. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
What is the factory wheel offset for a 2024 Mercedes-Benz Sprinter 2500 Cargo?
The OEM offset for the 2024 Sprinter 2500 Cargo is typically around 30-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Do 2024 Mercedes-Benz Sprinter 2500 Cargos use lug bolts or lug nuts?
The 2024 Sprinter 2500 Cargo requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Why is matching the 66.6mm center bore important for the 2024 Sprinter 2500 Cargo?
The 66.6mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the center bore of a 2024 Mercedes-Benz Sprinter 2500 Cargo?
The factory center bore (hub bore) for the 2024 Mercedes-Benz Sprinter 2500 Cargo is 66.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset