2019 BMW Z4 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 BMW Z4, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.25 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 25-40 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2019 Z4 — Year-Specific Fitment Context
The 2019 model year marks the beginning of the BMW Z4's 5x112 bolt pattern era, which continued through 2024 (6 consecutive years). Wheels from any 2019–2024 BMW Z4 are cross-compatible with the 2019 model. Across its full production run (2003–2024), the Z4 has also used: 5x120.
BMW Z4 Bolt Pattern by Year
The table below shows how the Z4's wheel specifications have changed over the years. The 2019 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2003 | 5x120 | 72.6 | 47 |
| 2004 | 5x120 | 72.6 | 47 |
| 2005 | 5x120 | 72.6 | 47 |
| 2006 | 5x120 | 72.6 | 47 |
| 2007 | 5x120 | 72.6 | 47 |
| 2008 | 5x120 | 72.6 | 30 front, 40 rear |
| 2009 | 5x120 | 72.6 | 30 front, 40 rear |
| 2010 | 5x120 | 72.6 | 30 front, 40 rear |
| 2011 | 5x120 | 72.6 | 30 front, 40 rear |
| 2012 | 5x120 | 72.6 | 30 front, 40 rear |
| 2013 | 5x120 | 72.6 | 30 front, 40 rear |
| 2014 | 5x120 | 72.6 | 30 front, 40 rear |
| 2015 | 5x120 | 72.6 | 30 front, 40 rear |
| 2016 | 5x120 | 72.6 | 30 front, 40 rear |
| ▸ 2019 | 5x112 | 66.6 | 25-40 |
| 2020 | 5x112 | 66.6 | 25-40 |
| 2021 | 5x112 | 66.6 | 25-40 |
| 2022 | 5x112 | 66.6 | 25-40 |
| 2024 | 5x112 | 66.6 | 25-40 |
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2019 BMW Z4
For your 2019 BMW Z4, the 5x112 bolt pattern is shared with 2019-2024 models, ensuring cross-compatibility. The 66.6mm center bore requires hub-centric rings for aftermarket wheels to prevent vibration. Offset must stay within 25-40mm; deviations risk rubbing or poor handling. Always use 14x1.25 lug nuts with the correct seat type (ball seat for BMW) to avoid wheel damage. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, BMW Z4 appears from 2003 to 2024 (19 model years). Across model years, this model appears with 2 bolt patterns (5x112, 5x120).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 87.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings with aftermarket wheels to match the 66.6mm center bore.
- ✅ Stick to 25-40mm offset; lower offsets may rub fenders, higher offsets may contact suspension.
- ✅ Re-torque lug nuts to 120 Nm after 50-100 miles of driving.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 BMW Z4 — Frequently Asked Questions
What is the bolt pattern for a 2019 BMW Z4?
The 2019 BMW Z4 uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 25-40mm.
What other years of BMW Z4 have the same bolt pattern as the 2019?
The BMW Z4 uses the 5x112 pattern from 2019 through 2024. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
What is the factory wheel offset for a 2019 BMW Z4?
The OEM offset for the 2019 Z4 is typically around 25-40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the PCD for a 2019 BMW Z4?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2019 Z4, the PCD is 5x112.
What is the center bore of a 2019 BMW Z4?
The factory center bore (hub bore) for the 2019 BMW Z4 is 66.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I use spacers on my 2019 BMW Z4?
Yes, but ensure the wheel spacers match the 5x112 bolt pattern and 66.6mm center bore. Also verify that you have enough thread engagement for your 14x1.25 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset