2021 BMW Z4 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2021 BMW Z4, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.25 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 25-40 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2021 Z4 — Year-Specific Fitment Context
The 2021 BMW Z4 is in year 3 of 6 using the 5x112 pattern (2019–2024). Wheels from any 2019–2024 BMW Z4 are cross-compatible with the 2021 model. Across its full production run (2003–2024), the Z4 has also used: 5x120.
BMW Z4 Bolt Pattern by Year
The table below shows how the Z4's wheel specifications have changed over the years. The 2021 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2003 | 5x120 | 72.6 | 47 |
| 2004 | 5x120 | 72.6 | 47 |
| 2005 | 5x120 | 72.6 | 47 |
| 2006 | 5x120 | 72.6 | 47 |
| 2007 | 5x120 | 72.6 | 47 |
| 2008 | 5x120 | 72.6 | 30 front, 40 rear |
| 2009 | 5x120 | 72.6 | 30 front, 40 rear |
| 2010 | 5x120 | 72.6 | 30 front, 40 rear |
| 2011 | 5x120 | 72.6 | 30 front, 40 rear |
| 2012 | 5x120 | 72.6 | 30 front, 40 rear |
| 2013 | 5x120 | 72.6 | 30 front, 40 rear |
| 2014 | 5x120 | 72.6 | 30 front, 40 rear |
| 2015 | 5x120 | 72.6 | 30 front, 40 rear |
| 2016 | 5x120 | 72.6 | 30 front, 40 rear |
| 2019 | 5x112 | 66.6 | 25-40 |
| 2020 | 5x112 | 66.6 | 25-40 |
| ▸ 2021 | 5x112 | 66.6 | 25-40 |
| 2022 | 5x112 | 66.6 | 25-40 |
| 2024 | 5x112 | 66.6 | 25-40 |
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2021 BMW Z4
For your 2021 BMW Z4, the correct bolt pattern is 5x112, but the center bore of 66.6mm is critical. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibrations and ensure proper load transfer. The offset range is tight: 25-40mm. Sticking to this range avoids rubbing or clearance issues with suspension and brakes. Always use lug nuts with the correct thread pitch (14x1.25) and seat type—either cone or ball seat, depending on your wheel. Mixing seat types can lead to loose wheels and accidents. Verify compatibility with your specific Z4 model (G29) and consider that 2019–2024 Z4 wheels are direct swaps.
Historical Fitment Data Reference
In our dataset, BMW Z4 appears from 2003 to 2024 (19 model years). Across model years, this model appears with 2 bolt patterns (5x112, 5x120).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 87.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels from pre-2019 BMWs with 5x120 pattern; they require adapters and may not clear brakes.
- ✅ Check inner clearance for aftermarket wheels; the Z4's brake calipers can be large, especially on M40i models.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2021 BMW Z4 — Frequently Asked Questions
What is the bolt pattern for a 2021 BMW Z4?
The 2021 BMW Z4 uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 25-40mm.
What other years of BMW Z4 have the same bolt pattern as the 2021?
The BMW Z4 uses the 5x112 pattern from 2019 through 2024. Wheels from any of these model years are dimensionally compatible with the 2021, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2021 BMW?
The 2021 Z4 uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the PCD for a 2021 BMW Z4?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2021 Z4, the PCD is 5x112.
Can I use spacers on my 2021 BMW Z4?
Yes, but ensure the wheel spacers match the 5x112 bolt pattern and 66.6mm center bore. Also verify that you have enough thread engagement for your 14x1.25 hardware.
What is the center bore of a 2021 BMW Z4?
The factory center bore (hub bore) for the 2021 BMW Z4 is 66.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset