2011 Mercedes-Benz Sprinter 2500 Cargo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 Mercedes-Benz Sprinter 2500 Cargo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x130 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 84.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2011 Sprinter 2500 Cargo — Year-Specific Fitment Context
The 2011 model year marks the beginning of the Mercedes-Benz Sprinter 2500 Cargo's 6x130 bolt pattern era, which continued through 2019 (9 consecutive years). Wheels from any 2011–2019 Mercedes-Benz Sprinter 2500 Cargo are cross-compatible with the 2011 model. Across its full production run (2011–2024), the Sprinter 2500 Cargo has also used: 5x112.
Mercedes-Benz Sprinter 2500 Cargo Bolt Pattern by Year
The table below shows how the Sprinter 2500 Cargo's wheel specifications have changed over the years. The 2011 model year is highlighted.
6x130 Pattern Context
This bolt pattern appears on 63 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x130:
Expert Buying Guide for 2011 Mercedes-Benz Sprinter 2500 Cargo
For the 2011 Mercedes-Benz Sprinter 2500 Cargo, the 6x130 bolt pattern and 84.1mm center bore are critical. Aftermarket wheels must have a bore ≥84.1mm; use hub-centric rings to avoid vibration. Offset should stay near 50mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with 14x1.5 thread pitch and correct seat type (cone or ball) to prevent loosening. Verify load rating matches the vehicle's GVWR. Wheels from 2011–2019 Sprinter 2500 Cargo are direct fit.
Historical Fitment Data Reference
In our dataset, Mercedes-Benz Sprinter 2500 Cargo appears from 2011 to 2024 (13 model years). Across model years, this model appears with 2 bolt patterns (5x112, 6x130).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 100.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50 miles of driving to ensure proper seating.
- ✅ Avoid using wheels from 5x112 models without proper adapters; they are not compatible.
- ✅ Check wheel load rating (minimum 2,500 lbs per wheel) for heavy cargo use.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 Mercedes-Benz Sprinter 2500 Cargo — Frequently Asked Questions
What is the bolt pattern for a 2011 Mercedes-Benz Sprinter 2500 Cargo?
The 2011 Mercedes-Benz Sprinter 2500 Cargo uses a 6x130 bolt pattern (also called lug pattern or PCD). The center bore is 84.1mm and the offset is 50mm.
What other years of Mercedes-Benz Sprinter 2500 Cargo have the same bolt pattern as the 2011?
The Mercedes-Benz Sprinter 2500 Cargo uses the 6x130 pattern from 2011 through 2019. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2011 Mercedes-Benz Sprinter 2500 Cargo?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I use spacers on my 2011 Mercedes-Benz Sprinter 2500 Cargo?
Yes, but ensure the wheel spacers match the 6x130 bolt pattern and 84.1mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
What is the center bore of a 2011 Mercedes-Benz Sprinter 2500 Cargo?
The factory center bore (hub bore) for the 2011 Mercedes-Benz Sprinter 2500 Cargo is 84.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the PCD for a 2011 Mercedes-Benz Sprinter 2500 Cargo?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2011 Sprinter 2500 Cargo, the PCD is 6x130.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset