2025 Audi SQ7 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2025 Audi SQ7, along with offset and center bore data.
2025 Audi SQ7 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 66.5 mm |
| Offset (ET) | 20-30 |
| Torque Specs | 103 ft-lbs (140 Nm) |
2025 SQ7 — Year-Specific Fitment Context
The 2025 model year is the final year of the Audi SQ7's 5x112 bolt pattern run (since 2021). Wheels from any 2021–2025 Audi SQ7 are cross-compatible with the 2025 model.
Audi SQ7 Bolt Pattern by Year
The table below shows how the SQ7's wheel specifications have changed over the years. The 2025 model year is highlighted.
5x112 Pattern Context
This bolt pattern appears on 1661 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x112:
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 103 ft-lbs (140 Nm), then re-check torque after 50-100 km (30-60 miles).
2025 Audi SQ7 — Frequently Asked Questions
What is the bolt pattern for a 2025 Audi SQ7?
The 2025 Audi SQ7 uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.5mm and the offset is 20-30mm.
What other years of Audi SQ7 have the same bolt pattern as the 2025?
The Audi SQ7 uses the 5x112 pattern from 2021 through 2025. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
Can I use spacers on my 2025 Audi SQ7?
Yes, but ensure the wheel spacers match the 5x112 bolt pattern and 66.5mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
What is the PCD for a 2025 Audi SQ7?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2025 SQ7, the PCD is 5x112.
How do I measure the bolt pattern on my 2025 Audi?
The 2025 SQ7 uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the center bore of a 2025 Audi SQ7?
The factory center bore (hub bore) for the 2025 Audi SQ7 is 66.5mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset