2025 Audi RS e-tron GT Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Audi RS e-tron GT is 5x112. It has a center bore of 66.5 mm, an offset range of 30-45, and utilizes 14x1.5 (Ball seat, 17mm hex) fasteners tightened to 103 ft-lbs (140 Nm).
2025 Audi RS e-tron GT Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Center Bore (Hub Bore) | 66.5 mm |
| Offset Range (ET) | 30-45 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Lug Wrench / Socket Hex Size | 17mm |
| Wheel Torque Specs | 103 ft-lbs (140 Nm) |
2025 RS e-tron GT — Year-Specific Fitment Context
The 2025 Audi RS e-tron GT is in year 3 of 4 using the 5x112 pattern (2023–2026). Wheels from any 2023–2026 Audi RS e-tron GT are cross-compatible with the 2025 model. Across its full production run (2022–2026), the RS e-tron GT has also used: 5x130.
Audi RS e-tron GT Bolt Pattern by Year
Looking for all generations? View the complete Audi RS e-tron GT (2022–2026) Bolt Pattern & Generation Guide →
The table below shows how the RS e-tron GT's wheel specifications have changed over the years. The 2025 model year is highlighted.
2025 Audi RS e-tron GT Wheel Interchange & Donor Fitment Guide (5x112)
The 5x112 bolt pattern is shared by 1795 vehicles in our database (very common). For safe wheel swaps on the 2025 Audi RS e-tron GT, donor rims must match the 5x112 PCD and have a center bore of at least 66.5 mm:
DIRECT HUB MATCH Same 5x112 Pattern & Exact 66.5mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2026 BMW 4 Series | 66.6 mm (Exact) | 25-40 | 14x1.25 (Cone) |
| 2025 BMW 430i | 66.6 mm (Exact) | 25-40 | 14x1.25 (Cone) |
| 2016 BMW 5 Series | 66.5 mm (Exact) | 26 | B 14x1.25 (Cone) |
| 2025 BMW 530i | 66.6 mm (Exact) | 30-40 | 14x1.25 (Cone) |
| 2025 BMW 540i | 66.6 mm (Exact) | 30-40 | 14x1.25 (Cone) |
| 2025 BMW 550e | 66.6 mm (Exact) | 30-40 | 14x1.25 (Cone) |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 103 ft-lbs (140 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Audi RS e-tron GT — Frequently Asked Questions
What is the bolt pattern for a 2025 Audi RS e-tron GT?
The 2025 Audi RS e-tron GT uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.5mm and the offset is 30-45mm.
What other years of Audi RS e-tron GT have the same bolt pattern as the 2025?
The Audi RS e-tron GT uses the 5x112 pattern from 2023 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
What is the PCD for a 2025 Audi RS e-tron GT?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2025 RS e-tron GT, the PCD is 5x112.
Can I put aftermarket wheels on my 2025 Audi RS e-tron GT?
Absolutely. Just ensure the aftermarket wheels have a 5x112 bolt pattern, an offset near 30-45mm, and a center bore of at least 66.5mm (using hub rings if larger).
How tight should I torque the lug nuts on a 2025 Audi RS e-tron GT?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What lug nut size does the 2025 Audi RS e-tron GT use?
The 2025 Audi RS e-tron GT uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →