2025 BMW 550e Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 BMW 550e is 5x112. It has a center bore of 66.6 mm, an offset range of 30-40, and utilizes 14x1.25 (Cone seat, 17mm hex) fasteners tightened to 101 ft-lbs (140 Nm).
2025 BMW 550e Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Center Bore (Hub Bore) | 66.6 mm |
| Offset Range (ET) | 30-40 |
| Thread Size (Lug Nut / Bolt) | 14x1.25 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 17mm |
| Wheel Torque Specs | 101 ft-lbs (140 Nm) |
2025 550e — Year-Specific Fitment Context
The 2025 model year marks the beginning of the BMW 550e's 5x112 bolt pattern era, which continued through 2026 (2 consecutive years). Wheels from any 2025–2026 BMW 550e are cross-compatible with the 2025 model.
BMW 550e Bolt Pattern by Year
Looking for all generations? View the complete BMW 550e (2025–2026) Bolt Pattern & Generation Guide →
The table below shows how the 550e's wheel specifications have changed over the years. The 2025 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 2025 | 5x112 | 66.6 | 30-40 |
| 2026 | 5x112 | 66.6 | 30-40 |
2025 BMW 550e Wheel Interchange & Donor Fitment Guide (5x112)
The 5x112 bolt pattern is shared by 1795 vehicles in our database (very common). For safe wheel swaps on the 2025 BMW 550e, donor rims must match the 5x112 PCD and have a center bore of at least 66.6 mm:
DIRECT HUB MATCH Same 5x112 Pattern & Exact 66.6mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2026 BMW X7 | 66.6 mm (Exact) | 35-45 | 14x1.25 (Cone) |
| 2025 BMW XM | 66.6 mm (Exact) | 35-45 | 14x1.25 (Cone) |
| 2019 BMW Z4 | 66.6 mm (Exact) | 25-40 | 14x1.25 (Cone) |
| 2025 McLaren 750S | 66.5 mm (Exact) | Front: +32mm, Rear: +40mm | 14x1.5 (Ball) |
| 2022 Mercedes-Benz A-Class | 66.6 mm (Exact) | 30-50 | 14x1.5 (Ball) |
| 2025 Mercedes-Benz AMG GT | 66.5 mm (Exact) | Not Applicable | 14x1.5 (Ball) |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 101 ft-lbs (140 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 BMW 550e — Frequently Asked Questions
What is the bolt pattern for a 2025 BMW 550e?
The 2025 BMW 550e uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 30-40mm.
What other years of BMW 550e have the same bolt pattern as the 2025?
The BMW 550e uses the 5x112 pattern from 2025 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2025 BMW 550e?
Refer to your owner's manual for exact specs, but always tighten the 14x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the PCD for a 2025 BMW 550e?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2025 550e, the PCD is 5x112.
Can I use spacers on my 2025 BMW 550e?
Yes, but ensure the wheel spacers match the 5x112 bolt pattern and 66.6mm center bore. Also verify that you have enough thread engagement for your 14x1.25 hardware.
How do I measure the bolt pattern on my 2025 BMW?
The 2025 550e uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →