2010 Bentley Azure T Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Bentley Azure T, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120 |
|---|---|
| Lug Nut / Bolt Size | M14x1.5 |
| Center Bore (CB) | 72.6 mm |
| Offset (ET) | 35-45mm |
| Torque Specs | 100 ft-lbs (135 Nm) |
2010 Azure T — Year-Specific Fitment Context
The 2010 is the only model year of the Bentley Azure T in our database using the 5x120 bolt pattern.
5x120 Pattern Context
This bolt pattern appears on 633 vehicles in our current database and is considered common.
Examples of other vehicles using 5x120:
Expert Buying Guide for 2010 Bentley Azure T
The 2010 Bentley Azure T uses a 5x120 bolt pattern with a 72.6mm center bore. When selecting aftermarket wheels, hub-centric rings are mandatory to ensure proper load distribution and prevent vibrations. The offset range is 35-45mm; deviating outside this range may cause rubbing or clearance issues with brakes and suspension. Always use lug nuts with M14x1.5 thread pitch and the correct seat type (ball or cone) matching the wheel. Improper lug nut seating can lead to wheel loosening. Verify that aftermarket wheels are load-rated for this heavy vehicle.
Historical Fitment Data Reference
In our dataset, Bentley Azure T appears from 2010 to 2010 (1 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; the 72.6mm bore is critical for centering.
- ✅ Check brake caliper clearance when using wheels with offset near 35mm, as the Azure T has large brakes.
- ⚠️ Confirm bolt pattern carefully. 5x120 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 Bentley Azure T — Frequently Asked Questions
What is the bolt pattern for a 2010 Bentley Azure T?
The 2010 Bentley Azure T uses a 5x120 bolt pattern (also called lug pattern or PCD). The center bore is 72.6mm and the offset is 35-45mmmm.
How do I measure the bolt pattern on my 2010 Bentley?
The 2010 Azure T uses a 5x120 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Why is matching the 72.6mm center bore important for the 2010 Azure T?
The 72.6mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Can I put aftermarket wheels on my 2010 Bentley Azure T?
Absolutely. Just ensure the aftermarket wheels have a 5x120 bolt pattern, an offset near 35-45mmmm, and a center bore of at least 72.6mm (using hub rings if larger).
Will wheels from another Bentley fit my 2010 Azure T?
Only if they share the exact same 5x120 bolt pattern, a compatible offset, and a center bore equal to or larger than 72.6mm.
How tight should I torque the lug nuts on a 2010 Bentley Azure T?
Refer to your owner's manual for exact specs, but always tighten the M14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset