2024 BMW 330e Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 BMW 330e, along with offset and center bore data.
2024 BMW 330e Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.25 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 30-40 |
| Torque Specs | 103 ft-lbs (140 Nm) |
2024 330e — Year-Specific Fitment Context
The 2024 is the only model year of the BMW 330e in our database using the 5x112 bolt pattern.
5x112 Pattern Context
This bolt pattern appears on 1661 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x112:
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 103 ft-lbs (140 Nm), then re-check torque after 50-100 km (30-60 miles).
2024 BMW 330e — Frequently Asked Questions
What is the bolt pattern for a 2024 BMW 330e?
The 2024 BMW 330e uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 30-40mm.
What lug nut size does the 2024 BMW 330e use?
The 2024 BMW 330e uses 14x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How do I measure the bolt pattern on my 2024 BMW?
The 2024 330e uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the center bore of a 2024 BMW 330e?
The factory center bore (hub bore) for the 2024 BMW 330e is 66.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the factory wheel offset for a 2024 BMW 330e?
The OEM offset for the 2024 330e is typically around 30-40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I put aftermarket wheels on my 2024 BMW 330e?
Absolutely. Just ensure the aftermarket wheels have a 5x112 bolt pattern, an offset near 30-40mm, and a center bore of at least 66.6mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset