2024 BMW 330i Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2024 BMW 330i is 5x112. It has a center bore of 66.6 mm, an offset range of 30-40, and utilizes 14x1.25 (Cone seat, 17mm hex) fasteners tightened to 101 ft-lbs (140 Nm).
2024 BMW 330i Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Center Bore (Hub Bore) | 66.6 mm |
| Offset Range (ET) | 30-40 |
| Thread Size (Lug Nut / Bolt) | 14x1.25 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 17mm |
| Wheel Torque Specs | 101 ft-lbs (140 Nm) |
2024 330i — Year-Specific Fitment Context
The 2024 model year marks the beginning of the BMW 330i's 5x112 bolt pattern era, which continued through 2026 (3 consecutive years). Wheels from any 2024–2026 BMW 330i are cross-compatible with the 2024 model.
BMW 330i Bolt Pattern by Year
Looking for all generations? View the complete BMW 330i (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the 330i's wheel specifications have changed over the years. The 2024 model year is highlighted.
2024 BMW 330i Wheel Interchange & Donor Fitment Guide (5x112)
The 5x112 bolt pattern is shared by 1795 vehicles in our database (very common). For safe wheel swaps on the 2024 BMW 330i, donor rims must match the 5x112 PCD and have a center bore of at least 66.6 mm:
DIRECT HUB MATCH Same 5x112 Pattern & Exact 66.6mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2024 BMW 340i | 66.6 mm (Exact) | 35-45 | 14x1.25 (Cone) |
| 2019 BMW 4 Series | 66.6 mm (Exact) | 25-40 | 14x1.25 (Cone) |
| 2025 BMW 430i | 66.6 mm (Exact) | 25-40 | 14x1.25 (Cone) |
| 2016 BMW 5 Series | 66.5 mm (Exact) | 26 | B 14x1.25 (Cone) |
| 2025 BMW 530i | 66.6 mm (Exact) | 30-40 | 14x1.25 (Cone) |
| 2025 BMW 540i | 66.6 mm (Exact) | 30-40 | 14x1.25 (Cone) |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 101 ft-lbs (140 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 BMW 330i — Frequently Asked Questions
What is the bolt pattern for a 2024 BMW 330i?
The 2024 BMW 330i uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 30-40mm.
What other years of BMW 330i have the same bolt pattern as the 2024?
The BMW 330i uses the 5x112 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
What is the PCD for a 2024 BMW 330i?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2024 330i, the PCD is 5x112.
How tight should I torque the lug nuts on a 2024 BMW 330i?
Refer to your owner's manual for exact specs, but always tighten the 14x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the factory wheel offset for a 2024 BMW 330i?
The OEM offset for the 2024 330i is typically around 30-40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What does 30-40mm offset mean for the 2024 330i?
An offset of 30-40mm means the wheel's mounting surface is 30-40mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your BMW.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →