2026 BMW 740i Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 BMW 740i is 5x112. It has a center bore of 66.6 mm, an offset range of 25-35, and utilizes 14x1.25 (Cone seat, 17mm hex) fasteners tightened to 101 ft-lbs (137 Nm).
2026 BMW 740i Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Center Bore (Hub Bore) | 66.6 mm |
| Offset Range (ET) | 25-35 |
| Thread Size (Lug Nut / Bolt) | 14x1.25 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 17mm |
| Wheel Torque Specs | 101 ft-lbs (137 Nm) |
2026 740i — Year-Specific Fitment Context
The 2026 model year is the final year of the BMW 740i's 5x112 bolt pattern run (since 2024). Wheels from any 2024–2026 BMW 740i are cross-compatible with the 2026 model.
BMW 740i Bolt Pattern by Year
Looking for all generations? View the complete BMW 740i (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the 740i's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 BMW 740i Wheel Interchange & Donor Fitment Guide (5x112)
The 5x112 bolt pattern is shared by 1795 vehicles in our database (very common). For safe wheel swaps on the 2026 BMW 740i, donor rims must match the 5x112 PCD and have a center bore of at least 66.6 mm:
DIRECT HUB MATCH Same 5x112 Pattern & Exact 66.6mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2009 Audi A4 | 66.6 mm (Exact) | 45 | B 14x1.50 (Ball) |
| 2025 Audi A4 allroad | 66.5 mm (Exact) | 40-45 | 14x1.5 (Ball) |
| 2023 Audi A5 | 66.5 mm (Exact) | 30-45 | 14x1.5 (Ball) |
| 2017 Audi A5 Sport | 66.6 mm (Exact) | 29 | B 14x1.50 (Ball) |
| 2018 Audi A6 | 66.6 mm (Exact) | 30-45 | 14x1.5 (Ball) |
| 2025 Audi A6 allroad | 66.5 mm (Exact) | 35-45 | 14x1.5 (Ball) |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 101 ft-lbs (137 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 BMW 740i — Frequently Asked Questions
What is the bolt pattern for a 2026 BMW 740i?
The 2026 BMW 740i uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 25-35mm.
What other years of BMW 740i have the same bolt pattern as the 2026?
The BMW 740i uses the 5x112 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
What is the center bore of a 2026 BMW 740i?
The factory center bore (hub bore) for the 2026 BMW 740i is 66.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How tight should I torque the lug nuts on a 2026 BMW 740i?
Refer to your owner's manual for exact specs, but always tighten the 14x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the factory wheel offset for a 2026 BMW 740i?
The OEM offset for the 2026 740i is typically around 25-35mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Do 2026 BMW 740is use lug bolts or lug nuts?
The 2026 740i requires 14x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →