2024 BMW i4 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 BMW i4, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.25 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 25-40 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2024 i4 — Year-Specific Fitment Context
The 2024 model year is the final year of the BMW i4's 5x112 bolt pattern run (since 2022). Wheels from any 2022–2024 BMW i4 are cross-compatible with the 2024 model.
BMW i4 Bolt Pattern by Year
The table below shows how the i4's wheel specifications have changed over the years. The 2024 model year is highlighted.
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2024 BMW i4
For the 2024 BMW i4, the 5x112 bolt pattern and 66.6mm center bore are critical. Aftermarket wheels must use hub-centric rings to prevent vibration and ensure load is on the hub, not the lug nuts. Offset must stay within 25-40mm; deviating risks rubbing or poor handling. Always use 14x1.25 lug nuts with the correct seat type—factory wheels use ball seats, while many aftermarket wheels require conical (60-degree) seats. Mixing seat types can cause wheel loosening. Verify lug nut engagement (minimum 6-8 full turns) and torque to manufacturer specs (typically 100-110 lb-ft).
Historical Fitment Data Reference
In our dataset, BMW i4 appears from 2022 to 2024 (3 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 65.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to account for settling.
- ✅ Avoid using universal fit wheels without verifying center bore and offset; hub-centric rings are mandatory for non-66.6mm bores.
- ✅ Check for brake caliper clearance, especially with aftermarket wheels, as the i4's large brakes may require specific spoke designs.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 BMW i4 — Frequently Asked Questions
What is the bolt pattern for a 2024 BMW i4?
The 2024 BMW i4 uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 25-40mm.
What other years of BMW i4 have the same bolt pattern as the 2024?
The BMW i4 uses the 5x112 pattern from 2022 through 2024. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
Will wheels from another BMW fit my 2024 i4?
Only if they share the exact same 5x112 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.6mm.
What is the factory wheel offset for a 2024 BMW i4?
The OEM offset for the 2024 i4 is typically around 25-40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I put aftermarket wheels on my 2024 BMW i4?
Absolutely. Just ensure the aftermarket wheels have a 5x112 bolt pattern, an offset near 25-40mm, and a center bore of at least 66.6mm (using hub rings if larger).
What is the center bore of a 2024 BMW i4?
The factory center bore (hub bore) for the 2024 BMW i4 is 66.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset