2025 BMW X6 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 BMW X6 is 5x112. It has a center bore of 66.6 mm, an offset range of 35-45, and utilizes 14x1.25 (Cone seat, 17mm hex) fasteners tightened to 101 ft-lbs (140 Nm).
2025 BMW X6 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Center Bore (Hub Bore) | 66.6 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 14x1.25 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 17mm |
| Wheel Torque Specs | 101 ft-lbs (140 Nm) |
2025 X6 — Year-Specific Fitment Context
The 2025 BMW X6 is in year 7 of 8 using the 5x112 pattern (2019–2026). Wheels from any 2019–2026 BMW X6 are cross-compatible with the 2025 model. Across its full production run (2008–2026), the X6 has also used: 5x120.
BMW X6 Bolt Pattern by Year
Looking for all generations? View the complete BMW X6 (2008–2026) Bolt Pattern & Generation Guide →
The table below shows how the X6's wheel specifications have changed over the years. The 2025 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2008 | 5x120 | 74.1 | 46 |
| 2009 | 5x120 | 74.1 | 46 |
| 2010 | 5x120 | 74.1 | 46 |
| 2011 | 5x120 | 74.1 | 46 |
| 2012 | 5x120 | 74.1 | 46 |
| 2013 | 5x120 | 74.1 | 46 |
| 2014 | 5x120 | 74.1 | 46 |
| 2015 | 5x120 | 74.1 | 46 |
| 2016 | 5x120 | 74.1 | 46 |
| 2017 | 5x120 | 74.1 | 46 |
| 2018 | 5x120 | 72.56 | 30-40 |
| 2019 | 5x112 | 66.6 | 25-40 |
| 2020 | 5x112 | 66.6 | 25-40 |
| 2021 | 5x112 | 66.6 | 25-40 |
| 2022 | 5x112 | 66.6 | 25-40 |
| 2023 | 5x112 | 66.6 | 25-40 |
| 2024 | 5x112 | 66.6 | 25-40 |
| ▸ 2025 | 5x112 | 66.6 | 35-45 |
| 2026 | 5x112 | 66.6 | 35-45 |
2025 BMW X6 Wheel Interchange & Donor Fitment Guide (5x112)
The 5x112 bolt pattern is shared by 1795 vehicles in our database (very common). For safe wheel swaps on the 2025 BMW X6, donor rims must match the 5x112 PCD and have a center bore of at least 66.6 mm:
DIRECT HUB MATCH Same 5x112 Pattern & Exact 66.6mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 BMW 3 Series | 66.6 mm (Exact) | 25-40 | 14x1.25 (Cone) |
| 2024 BMW 330e | 66.6 mm (Exact) | 30-40 | 14x1.25 (Cone) |
| 2025 BMW 330i | 66.6 mm (Exact) | 30-40 | 14x1.25 (Cone) |
| 2024 BMW 340i | 66.6 mm (Exact) | 35-45 | 14x1.25 (Cone) |
| 2019 BMW 4 Series | 66.6 mm (Exact) | 25-40 | 14x1.25 (Cone) |
| 2025 BMW 430i | 66.6 mm (Exact) | 25-40 | 14x1.25 (Cone) |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 101 ft-lbs (140 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 BMW X6 — Frequently Asked Questions
What is the bolt pattern for a 2025 BMW X6?
The 2025 BMW X6 uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 35-45mm.
What other years of BMW X6 have the same bolt pattern as the 2025?
The BMW X6 uses the 5x112 pattern from 2019 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
Do 2025 BMW X6s use lug bolts or lug nuts?
The 2025 X6 requires 14x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the factory wheel offset for a 2025 BMW X6?
The OEM offset for the 2025 X6 is typically around 35-45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Will wheels from another BMW fit my 2025 X6?
Only if they share the exact same 5x112 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.6mm.
How tight should I torque the lug nuts on a 2025 BMW X6?
Refer to your owner's manual for exact specs, but always tighten the 14x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →