2011 Buick Enclave Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 Buick Enclave, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 6x132
Lug Nut / Bolt Size N 14x1.50
Center Bore (CB) 74.5 mm
Offset (ET) 50
Torque Specs 100 ft-lbs (135 Nm)

2011 Enclave — Year-Specific Fitment Context

The 2011 Buick Enclave is in year 4 of 11 using the 6x132 pattern (2008–2018). Wheels from any 2008–2018 Buick Enclave are cross-compatible with the 2011 model. Across its full production run (2008–2024), the Enclave has also used: 6x120.

Buick Enclave Bolt Pattern by Year

The table below shows how the Enclave's wheel specifications have changed over the years. The 2011 model year is highlighted.

Year Bolt Pattern Center Bore Offset
2008 6x132 74.5 50
2009 6x132 74.5 50
2010 6x132 74.5 50
▸ 2011 6x132 74.5 50
2012 6x132 74.5 50
2013 6x132 74.5 50
2014 6x132 74.5 50
2015 6x132 74.5 50
2016 6x132 74.5 50
2017 6x132 74.5 50
2018 6x132 74.5 50
2019 6x120 66.9 50
2020 6x120 66.9 50
2021 6x120 66.9 50
2022 6x120 66.9 50
2023 6x120 66.9 50
2024 6x120 66.9 50

Fitment Notes

The 2011 Buick Enclave has a bolt pattern of 6x132.

This means it is a 6 lug pattern with a circle diameter of 132mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.

Year-to-Year Fitment Context

In our dataset, Buick Enclave appears from 2008 to 2024 (17 model years).

Across model years, this model appears with 2 bolt patterns (6x120, 6x132).

6x132 Pattern Context

This bolt pattern appears on 47 vehicles in our current database and is considered uncommon.

Examples of other vehicles using 6x132:

2011 Buick Enclave — Frequently Asked Questions

What is the bolt pattern for a 2011 Buick Enclave?

The 2011 Buick Enclave uses a 6x132 bolt pattern (also called lug pattern or PCD). The center bore is 74.5mm and the offset is 50mm.

What other years of Buick Enclave have the same bolt pattern as the 2011?

The Buick Enclave uses the 6x132 pattern from 2008 through 2018. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.

How do I measure the bolt pattern on my 2011 Buick?

The 2011 Enclave uses a 6x132 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.

What is the center bore of a 2011 Buick Enclave?

The factory center bore (hub bore) for the 2011 Buick Enclave is 74.5mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.

What is the PCD for a 2011 Buick Enclave?

PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2011 Enclave, the PCD is 6x132.

How tight should I torque the lug nuts on a 2011 Buick Enclave?

Refer to your owner's manual for exact specs, but always tighten the N 14x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.

Fitment Checklist Before You Buy Wheels

Editorial Fitment Notes

Buick Enclave has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.

Data Quality & Review

Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.

Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team

If you find a discrepancy for 2011 Buick Enclave, please report it via our About page contact so we can verify and update this record.

Buick Enclave By Year

2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024

Other Buick Models

Cascada Century Enclave Encore Encore GX Envision Envista LaCrosse LeSabre Park Avenue Rainier Regal Regal Sportback Regal TourX Rendezvous Riviera Roadmaster Skylark Terraza Verano