2020 Buick Enclave Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 Buick Enclave, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x120 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 66.9 mm |
| Offset (ET) | 50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2020 Enclave — Year-Specific Fitment Context
The 2020 Buick Enclave is in year 2 of 6 using the 6x120 pattern (2019–2024). Wheels from any 2019–2024 Buick Enclave are cross-compatible with the 2020 model. Across its full production run (2008–2024), the Enclave has also used: 6x132.
Buick Enclave Bolt Pattern by Year
The table below shows how the Enclave's wheel specifications have changed over the years. The 2020 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2008 | 6x132 | 74.5 | 50 |
| 2009 | 6x132 | 74.5 | 50 |
| 2010 | 6x132 | 74.5 | 50 |
| 2011 | 6x132 | 74.5 | 50 |
| 2012 | 6x132 | 74.5 | 50 |
| 2013 | 6x132 | 74.5 | 50 |
| 2014 | 6x132 | 74.5 | 50 |
| 2015 | 6x132 | 74.5 | 50 |
| 2016 | 6x132 | 74.5 | 50 |
| 2017 | 6x132 | 74.5 | 50 |
| 2018 | 6x132 | 74.5 | 50 |
| 2019 | 6x120 | 66.9 | 50 |
| ▸ 2020 | 6x120 | 66.9 | 50 |
| 2021 | 6x120 | 66.9 | 50 |
| 2022 | 6x120 | 66.9 | 50 |
| 2023 | 6x120 | 66.9 | 50 |
| 2024 | 6x120 | 66.9 | 50 |
6x120 Pattern Context
This bolt pattern appears on 76 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x120:
Expert Buying Guide for 2020 Buick Enclave
For your 2020 Buick Enclave, the 66.9mm center bore is critical: aftermarket wheels with a larger bore require hub-centric rings to prevent vibration and ensure proper load distribution. The 50mm offset is sensitive; deviations beyond ±5mm may cause rubbing or clearance issues. Always use 14x1.5 lug nuts with the correct seat type (conical or ball seat) matching your wheel. Mismatched seats can lead to loosening and wheel detachment. Verify lug nut torque to manufacturer specs and re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Buick Enclave appears from 2008 to 2024 (17 model years). Across model years, this model appears with 2 bolt patterns (6x120, 6x132).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lb after 50-100 miles of driving.
- ✅ Use hub-centric rings if aftermarket wheels have a bore larger than 66.9mm.
- ✅ Avoid wheels with offset below 45mm or above 55mm to prevent rubbing on suspension or fenders.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2020 Buick Enclave — Frequently Asked Questions
What is the bolt pattern for a 2020 Buick Enclave?
The 2020 Buick Enclave uses a 6x120 bolt pattern (also called lug pattern or PCD). The center bore is 66.9mm and the offset is 50mm.
What other years of Buick Enclave have the same bolt pattern as the 2020?
The Buick Enclave uses the 6x120 pattern from 2019 through 2024. Wheels from any of these model years are dimensionally compatible with the 2020, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2020 Buick Enclave?
Absolutely. Just ensure the aftermarket wheels have a 6x120 bolt pattern, an offset near 50mm, and a center bore of at least 66.9mm (using hub rings if larger).
What is the factory wheel offset for a 2020 Buick Enclave?
The OEM offset for the 2020 Enclave is typically around 50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the PCD for a 2020 Buick Enclave?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2020 Enclave, the PCD is 6x120.
Why is matching the 66.9mm center bore important for the 2020 Enclave?
The 66.9mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset