2019 Chevrolet Traverse Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Chevrolet Traverse, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x120 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 66.9 mm |
| Offset (ET) | 50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2019 Traverse — Year-Specific Fitment Context
The 2019 model year marks the beginning of the Chevrolet Traverse's 6x120 bolt pattern era, which continued through 2024 (6 consecutive years). Wheels from any 2019–2024 Chevrolet Traverse are cross-compatible with the 2019 model. Note: the 2018 model used a different pattern (6x132), so its wheels are NOT interchangeable with the 2019. Across its full production run (2009–2024), the Traverse has also used: 6x132.
Chevrolet Traverse Bolt Pattern by Year
The table below shows how the Traverse's wheel specifications have changed over the years. The 2019 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2009 | 6x132 | 74.5 | 42 |
| 2010 | 6x132 | 74.5 | 42 |
| 2011 | 6x132 | 74.5 | 42 |
| 2012 | 6x132 | 74.5 | 42 |
| 2013 | 6x132 | 74.5 | 42 |
| 2014 | 6x132 | 74.5 | 42 |
| 2015 | 6x132 | 74.5 | 42 |
| 2016 | 6x132 | 74.5 | 42 |
| 2017 | 6x132 | 74.5 | 42 |
| 2018 | 6x132 | 74.5 | 42 |
| ▸ 2019 | 6x120 | 66.9 | 50 |
| 2020 | 6x120 | 66.9 | 50 |
| 2021 | 6x120 | 66.9 | 50 |
| 2022 | 6x120 | 66.9 | 50 |
| 2023 | 6x120 | 66.9 | 50 |
| 2024 | 6x120 | 66.9 | 50 |
6x120 Pattern Context
This bolt pattern appears on 76 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x120:
Expert Buying Guide for 2019 Chevrolet Traverse
For the 2019 Chevrolet Traverse, the bolt pattern is 6x120 with a center bore of 66.9mm. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibrations. The factory offset is 50mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (14x1.5) and seat type (conical/60-degree). Mixing seat types can lead to wheel loosening. Verify that aftermarket wheels are load-rated for the Traverse's weight. Avoid wheels from pre-2019 models (6x132 pattern) as they are incompatible.
Historical Fitment Data Reference
In our dataset, Chevrolet Traverse appears from 2009 to 2024 (16 model years). Across model years, this model appears with 2 bolt patterns (6x120, 6x132).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 8.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ When using aftermarket wheels, confirm the center bore is at least 66.9mm; use hub-centric rings if larger.
- ✅ Check for brake caliper clearance, especially with low-offset wheels or larger brake kits.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 Chevrolet Traverse — Frequently Asked Questions
What is the bolt pattern for a 2019 Chevrolet Traverse?
The 2019 Chevrolet Traverse uses a 6x120 bolt pattern (also called lug pattern or PCD). The center bore is 66.9mm and the offset is 50mm.
What other years of Chevrolet Traverse have the same bolt pattern as the 2019?
The Chevrolet Traverse uses the 6x120 pattern from 2019 through 2024. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
Can I use 2018 Chevrolet Traverse wheels on a 2019?
No. The 2018 Traverse used a 6x132 bolt pattern, which differs from the 2019's 6x120. They are not interchangeable.
What is the PCD for a 2019 Chevrolet Traverse?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2019 Traverse, the PCD is 6x120.
What lug nut size does the 2019 Chevrolet Traverse use?
The 2019 Chevrolet Traverse uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Do 2019 Chevrolet Traverses use lug bolts or lug nuts?
The 2019 Traverse requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset