2020 Chevrolet Traverse Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 Chevrolet Traverse, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x120 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 66.9 mm |
| Offset (ET) | 50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2020 Traverse — Year-Specific Fitment Context
The 2020 Chevrolet Traverse is in year 2 of 6 using the 6x120 pattern (2019–2024). Wheels from any 2019–2024 Chevrolet Traverse are cross-compatible with the 2020 model. Across its full production run (2009–2024), the Traverse has also used: 6x132.
Chevrolet Traverse Bolt Pattern by Year
The table below shows how the Traverse's wheel specifications have changed over the years. The 2020 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2009 | 6x132 | 74.5 | 42 |
| 2010 | 6x132 | 74.5 | 42 |
| 2011 | 6x132 | 74.5 | 42 |
| 2012 | 6x132 | 74.5 | 42 |
| 2013 | 6x132 | 74.5 | 42 |
| 2014 | 6x132 | 74.5 | 42 |
| 2015 | 6x132 | 74.5 | 42 |
| 2016 | 6x132 | 74.5 | 42 |
| 2017 | 6x132 | 74.5 | 42 |
| 2018 | 6x132 | 74.5 | 42 |
| 2019 | 6x120 | 66.9 | 50 |
| ▸ 2020 | 6x120 | 66.9 | 50 |
| 2021 | 6x120 | 66.9 | 50 |
| 2022 | 6x120 | 66.9 | 50 |
| 2023 | 6x120 | 66.9 | 50 |
| 2024 | 6x120 | 66.9 | 50 |
6x120 Pattern Context
This bolt pattern appears on 76 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x120:
Expert Buying Guide for 2020 Chevrolet Traverse
When selecting aftermarket wheels for your 2020 Chevrolet Traverse, the 66.9mm center bore is critical. Most aftermarket wheels have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 50mm; staying within ±5mm is recommended to avoid rubbing or suspension interference. Always use lug nuts with the correct 14x1.5 thread pitch and a conical (60-degree) seat. Using incorrect lug nuts can cause wheel loosening or damage. Verify that your new wheels are hub-centric or use rings, and check offset carefully for safe fitment.
Historical Fitment Data Reference
In our dataset, Chevrolet Traverse appears from 2009 to 2024 (16 model years). Across model years, this model appears with 2 bolt patterns (6x120, 6x132).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 8.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
- ✅ Avoid wheels with offset below 45mm or above 55mm to prevent rubbing on struts or fenders.
- ✅ Ensure aftermarket wheels have a minimum load rating equal to or greater than the factory wheels (typically 1,700 lbs per wheel).
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2020 Chevrolet Traverse — Frequently Asked Questions
What is the bolt pattern for a 2020 Chevrolet Traverse?
The 2020 Chevrolet Traverse uses a 6x120 bolt pattern (also called lug pattern or PCD). The center bore is 66.9mm and the offset is 50mm.
What other years of Chevrolet Traverse have the same bolt pattern as the 2020?
The Chevrolet Traverse uses the 6x120 pattern from 2019 through 2024. Wheels from any of these model years are dimensionally compatible with the 2020, provided the offset and center bore also match.
Can I use spacers on my 2020 Chevrolet Traverse?
Yes, but ensure the wheel spacers match the 6x120 bolt pattern and 66.9mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
How tight should I torque the lug nuts on a 2020 Chevrolet Traverse?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the PCD for a 2020 Chevrolet Traverse?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2020 Traverse, the PCD is 6x120.
Can I put aftermarket wheels on my 2020 Chevrolet Traverse?
Absolutely. Just ensure the aftermarket wheels have a 6x120 bolt pattern, an offset near 50mm, and a center bore of at least 66.9mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset