2012 Chevrolet Traverse Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2012 Chevrolet Traverse, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x132 |
|---|---|
| Lug Nut / Bolt Size | N 14x1.50 |
| Center Bore (CB) | 74.5 mm |
| Offset (ET) | 42 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2012 Traverse — Year-Specific Fitment Context
The 2012 Chevrolet Traverse is in year 4 of 10 using the 6x132 pattern (2009–2018). Wheels from any 2009–2018 Chevrolet Traverse are cross-compatible with the 2012 model. Across its full production run (2009–2024), the Traverse has also used: 6x120.
Chevrolet Traverse Bolt Pattern by Year
The table below shows how the Traverse's wheel specifications have changed over the years. The 2012 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2009 | 6x132 | 74.5 | 42 |
| 2010 | 6x132 | 74.5 | 42 |
| 2011 | 6x132 | 74.5 | 42 |
| ▸ 2012 | 6x132 | 74.5 | 42 |
| 2013 | 6x132 | 74.5 | 42 |
| 2014 | 6x132 | 74.5 | 42 |
| 2015 | 6x132 | 74.5 | 42 |
| 2016 | 6x132 | 74.5 | 42 |
| 2017 | 6x132 | 74.5 | 42 |
| 2018 | 6x132 | 74.5 | 42 |
| 2019 | 6x120 | 66.9 | 50 |
| 2020 | 6x120 | 66.9 | 50 |
| 2021 | 6x120 | 66.9 | 50 |
| 2022 | 6x120 | 66.9 | 50 |
| 2023 | 6x120 | 66.9 | 50 |
| 2024 | 6x120 | 66.9 | 50 |
6x132 Pattern Context
This bolt pattern appears on 47 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x132:
Expert Buying Guide for 2012 Chevrolet Traverse
The 2012 Chevrolet Traverse uses a 6x132 bolt pattern with a 74.5mm center bore. When selecting aftermarket wheels, ensure the center bore matches exactly or use hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 42mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut compatibility: the Traverse requires M14x1.50 thread pitch with a conical (60-degree) seat. Using incorrect lug nuts can lead to wheel separation. For wheels from 2009–2018 Traverse models, direct fit is possible; earlier or later models may differ. Safety first: improper fitment compromises handling and braking.
Historical Fitment Data Reference
In our dataset, Chevrolet Traverse appears from 2009 to 2024 (16 model years). Across model years, this model appears with 2 bolt patterns (6x120, 6x132).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 8.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lb after 50 miles of driving to ensure proper seating.
- ✅ Avoid using wheels with a smaller center bore than 74.5mm; hub-centric rings are mandatory for larger bores.
- ✅ Check for caliper clearance when changing offset; 42mm is optimal, but aftermarket wheels may require spacers.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2012 Chevrolet Traverse — Frequently Asked Questions
What is the bolt pattern for a 2012 Chevrolet Traverse?
The 2012 Chevrolet Traverse uses a 6x132 bolt pattern (also called lug pattern or PCD). The center bore is 74.5mm and the offset is 42mm.
What other years of Chevrolet Traverse have the same bolt pattern as the 2012?
The Chevrolet Traverse uses the 6x132 pattern from 2009 through 2018. Wheels from any of these model years are dimensionally compatible with the 2012, provided the offset and center bore also match.
Do 2012 Chevrolet Traverses use lug bolts or lug nuts?
The 2012 Traverse requires N 14x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How tight should I torque the lug nuts on a 2012 Chevrolet Traverse?
Refer to your owner's manual for exact specs, but always tighten the N 14x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Will wheels from another Chevrolet fit my 2012 Traverse?
Only if they share the exact same 6x132 bolt pattern, a compatible offset, and a center bore equal to or larger than 74.5mm.
What does 42mm offset mean for the 2012 Traverse?
An offset of 42mm means the wheel's mounting surface is 42mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Chevrolet.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset