2014 Chevrolet Traverse Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2014 Chevrolet Traverse is 6x132. It has a center bore of 74.5 mm, an offset range of 42, and utilizes N 14x1.50 (Cone seat, 22mm hex) fasteners tightened to 100 ft-lbs (135 Nm).
2014 Chevrolet Traverse Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 6x132 |
|---|---|
| Center Bore (Hub Bore) | 74.5 mm |
| Offset Range (ET) | 42 |
| Thread Size (Lug Nut / Bolt) | N 14x1.50 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 22mm |
| Wheel Torque Specs | 100 ft-lbs (135 Nm) |
2014 Traverse — Year-Specific Fitment Context
The 2014 Chevrolet Traverse is in year 6 of 10 using the 6x132 pattern (2009–2018). Wheels from any 2009–2018 Chevrolet Traverse are cross-compatible with the 2014 model. Across its full production run (2009–2025), the Traverse has also used: 6x120.
Chevrolet Traverse Bolt Pattern by Year
The table below shows how the Traverse's wheel specifications have changed over the years. The 2014 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2009 | 6x132 | 74.5 | 42 |
| 2010 | 6x132 | 74.5 | 42 |
| 2011 | 6x132 | 74.5 | 42 |
| 2012 | 6x132 | 74.5 | 42 |
| 2013 | 6x132 | 74.5 | 42 |
| ▸ 2014 | 6x132 | 74.5 | 42 |
| 2015 | 6x132 | 74.5 | 42 |
| 2016 | 6x132 | 74.5 | 42 |
| 2017 | 6x132 | 74.5 | 42 |
| 2018 | 6x132 | 74.5 | 42 |
| 2019 | 6x120 | 66.9 | 50 |
| 2020 | 6x120 | 66.9 | 50 |
| 2021 | 6x120 | 66.9 | 50 |
| 2022 | 6x120 | 66.9 | 50 |
| 2023 | 6x120 | 66.9 | 50 |
| 2024 | 6x120 | 66.9 | 50 |
| 2025 | 6x120 | 66.9 | 35-45 |
2014 Chevrolet Traverse Wheel Interchange & Donor Fitment Guide (6x132)
The 6x132 bolt pattern is shared by 48 vehicles in our database (uncommon). For safe wheel swaps on the 2014 Chevrolet Traverse, donor rims must match the 6x132 PCD and have a center bore of at least 74.5 mm:
DIRECT HUB MATCH Same 6x132 Pattern & Exact 74.5mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2018 Buick Enclave | 74.5 mm (Exact) | 50 | N 14x1.50 (Cone) |
| 2017 Cadillac XT5 | 74.5 mm (Exact) | 42 | N 14x1.50 (Cone) |
| 2007 GMC Acadia | 74.6 mm (Exact) | 50 | 14x1.5 (Cone) |
| 2007 Saturn Outlook | 74.6 mm (Exact) | 50 | 14x1.5 (Cone) |
| 2005 Saturn Relay | 74.5 mm (Exact) | 35-50mm | M12x1.5 (Cone) |
Expert Buying Guide for 2014 Chevrolet Traverse
For the 2014 Chevrolet Traverse, the correct bolt pattern is 6x132 with a center bore of 74.5mm. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration and ensure proper load distribution. The offset is sensitive; the factory spec is 42mm, but a range of 35-50mm is acceptable depending on tire width. Avoid offsets outside this range to prevent rubbing or clearance issues. Always use lug nuts with the correct thread pitch (14x1.50) and seat type (cone seat). Using incorrect lug nuts can lead to wheel loosening or damage. Re-torque lug nuts after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Chevrolet Traverse appears from 2009 to 2025 (17 model years). Across model years, this model appears with 2 bolt patterns (6x120, 6x132).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 95.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lbs after 50-100 miles of driving.
- ✅ Verify aftermarket wheels have a center bore of at least 74.5mm; use hub-centric rings if larger.
- ✅ Check for brake caliper clearance when using wheels with offset less than 35mm.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
2014 Chevrolet Traverse — Frequently Asked Questions
What is the bolt pattern for a 2014 Chevrolet Traverse?
The 2014 Chevrolet Traverse uses a 6x132 bolt pattern (also called lug pattern or PCD). The center bore is 74.5mm and the offset is 42mm.
What other years of Chevrolet Traverse have the same bolt pattern as the 2014?
The Chevrolet Traverse uses the 6x132 pattern from 2009 through 2018. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2014 Chevrolet?
The 2014 Traverse uses a 6x132 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the PCD for a 2014 Chevrolet Traverse?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2014 Traverse, the PCD is 6x132.
Can I put aftermarket wheels on my 2014 Chevrolet Traverse?
Absolutely. Just ensure the aftermarket wheels have a 6x132 bolt pattern, an offset near 42mm, and a center bore of at least 74.5mm (using hub rings if larger).
Do 2014 Chevrolet Traverses use lug bolts or lug nuts?
The 2014 Traverse requires N 14x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need Full Fitment Data in Bulk?
Stop scraping or looking up cars one by one. Import 12,400+ verified vehicle specs (1992–2025) directly into your Shopify store, inventory system, or custom automotive software.
Explore Master Database (CSV) →