2026 Chevrolet Traverse Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Chevrolet Traverse is 6x120. It has a center bore of 66.9 mm, an offset range of 35-45, and utilizes 14x1.5 (Cone seat, 22mm hex) fasteners tightened to 140 ft-lbs (190 Nm).
2026 Chevrolet Traverse Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 6x120 |
|---|---|
| Center Bore (Hub Bore) | 66.9 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 22mm |
| Wheel Torque Specs | 140 ft-lbs (190 Nm) |
2026 Traverse — Year-Specific Fitment Context
The 2026 model year is the final year of the Chevrolet Traverse's 6x120 bolt pattern run (since 2019). Wheels from any 2019–2026 Chevrolet Traverse are cross-compatible with the 2026 model. Across its full production run (2009–2026), the Traverse has also used: 6x132.
Chevrolet Traverse Bolt Pattern by Year
Looking for all generations? View the complete Chevrolet Traverse (2009–2026) Bolt Pattern & Generation Guide →
The table below shows how the Traverse's wheel specifications have changed over the years. The 2026 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2009 | 6x132 | 74.5 | 42 |
| 2010 | 6x132 | 74.5 | 42 |
| 2011 | 6x132 | 74.5 | 42 |
| 2012 | 6x132 | 74.5 | 42 |
| 2013 | 6x132 | 74.5 | 42 |
| 2014 | 6x132 | 74.5 | 42 |
| 2015 | 6x132 | 74.5 | 42 |
| 2016 | 6x132 | 74.5 | 42 |
| 2017 | 6x132 | 74.5 | 42 |
| 2018 | 6x132 | 74.5 | 42 |
| 2019 | 6x120 | 66.9 | 50 |
| 2020 | 6x120 | 66.9 | 50 |
| 2021 | 6x120 | 66.9 | 50 |
| 2022 | 6x120 | 66.9 | 50 |
| 2023 | 6x120 | 66.9 | 50 |
| 2024 | 6x120 | 66.9 | 50 |
| 2025 | 6x120 | 66.9 | 35-45 |
| ▸ 2026 | 6x120 | 66.9 | 35-45 |
2026 Chevrolet Traverse Wheel Interchange & Donor Fitment Guide (6x120)
The 6x120 bolt pattern is shared by 94 vehicles in our database (uncommon). For safe wheel swaps on the 2026 Chevrolet Traverse, donor rims must match the 6x120 PCD and have a center bore of at least 66.9 mm:
DIRECT HUB MATCH Same 6x120 Pattern & Exact 66.9mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2015 Chevrolet Colorado Extended Cab | 66.9 mm (Exact) | 33 | 14x1.5 (Cone) |
| 2021 Chevrolet TrailBlazer | 66.9 mm (Exact) | 50 | 14x1.5 (Cone) |
| 2024 Chevrolet Traverse Limited | 66.9 mm (Exact) | 50 | 14x1.5 (Cone) |
| 2017 GMC Acadia | 66.9 mm (Exact) | 50 | 14x1.5 (Cone) |
| 2017 GMC Acadia Limited | 66.9 mm (Exact) | 50 | 14x1.5 (Cone) |
| 2015 GMC Canyon Crew Cab | 66.9 mm (Exact) | 33 | 14x1.5 (Cone) |
Quick Tips & Safety Warnings
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Chevrolet Traverse — Frequently Asked Questions
What is the bolt pattern for a 2026 Chevrolet Traverse?
The 2026 Chevrolet Traverse uses a 6x120 bolt pattern (also called lug pattern or PCD). The center bore is 66.9mm and the offset is 35-45mm.
What other years of Chevrolet Traverse have the same bolt pattern as the 2026?
The Chevrolet Traverse uses the 6x120 pattern from 2019 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2026 Chevrolet Traverse?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
How do I measure the bolt pattern on my 2026 Chevrolet?
The 2026 Traverse uses a 6x120 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Why is matching the 66.9mm center bore important for the 2026 Traverse?
The 66.9mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What does 35-45mm offset mean for the 2026 Traverse?
An offset of 35-45mm means the wheel's mounting surface is 35-45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Chevrolet.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →