2010 Chevrolet Traverse Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Chevrolet Traverse, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x132 |
|---|---|
| Lug Nut / Bolt Size | N 14x1.50 |
| Center Bore (CB) | 74.5 mm |
| Offset (ET) | 42 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2010 Traverse — Year-Specific Fitment Context
The 2010 Chevrolet Traverse is in year 2 of 10 using the 6x132 pattern (2009–2018). Wheels from any 2009–2018 Chevrolet Traverse are cross-compatible with the 2010 model. Across its full production run (2009–2024), the Traverse has also used: 6x120.
Chevrolet Traverse Bolt Pattern by Year
The table below shows how the Traverse's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2009 | 6x132 | 74.5 | 42 |
| ▸ 2010 | 6x132 | 74.5 | 42 |
| 2011 | 6x132 | 74.5 | 42 |
| 2012 | 6x132 | 74.5 | 42 |
| 2013 | 6x132 | 74.5 | 42 |
| 2014 | 6x132 | 74.5 | 42 |
| 2015 | 6x132 | 74.5 | 42 |
| 2016 | 6x132 | 74.5 | 42 |
| 2017 | 6x132 | 74.5 | 42 |
| 2018 | 6x132 | 74.5 | 42 |
| 2019 | 6x120 | 66.9 | 50 |
| 2020 | 6x120 | 66.9 | 50 |
| 2021 | 6x120 | 66.9 | 50 |
| 2022 | 6x120 | 66.9 | 50 |
| 2023 | 6x120 | 66.9 | 50 |
| 2024 | 6x120 | 66.9 | 50 |
6x132 Pattern Context
This bolt pattern appears on 47 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x132:
Expert Buying Guide for 2010 Chevrolet Traverse
For the 2010 Chevrolet Traverse, the 6x132 bolt pattern and 74.5mm center bore are critical. Aftermarket wheels often have a larger center bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 42mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut compatibility: use 14x1.50 thread pitch with conical (60-degree) or ball seat as per wheel manufacturer. Never use incorrect seat types, as this can lead to wheel loosening. For wheels from 2009–2018 Traverse models, direct fit is possible; earlier or later models may differ.
Historical Fitment Data Reference
In our dataset, Chevrolet Traverse appears from 2009 to 2024 (16 model years). Across model years, this model appears with 2 bolt patterns (6x120, 6x132).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 8.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels with a center bore larger than 74.5mm without hub-centric rings; vibration and stress on studs may result.
- ✅ Check offset carefully: 42mm is ideal; offsets below 38mm may cause inner tire rub on suspension components.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 Chevrolet Traverse — Frequently Asked Questions
What is the bolt pattern for a 2010 Chevrolet Traverse?
The 2010 Chevrolet Traverse uses a 6x132 bolt pattern (also called lug pattern or PCD). The center bore is 74.5mm and the offset is 42mm.
What other years of Chevrolet Traverse have the same bolt pattern as the 2010?
The Chevrolet Traverse uses the 6x132 pattern from 2009 through 2018. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2010 Chevrolet?
The 2010 Traverse uses a 6x132 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What lug nut size does the 2010 Chevrolet Traverse use?
The 2010 Chevrolet Traverse uses N 14x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I use spacers on my 2010 Chevrolet Traverse?
Yes, but ensure the wheel spacers match the 6x132 bolt pattern and 74.5mm center bore. Also verify that you have enough thread engagement for your N 14x1.50 hardware.
Can I put aftermarket wheels on my 2010 Chevrolet Traverse?
Absolutely. Just ensure the aftermarket wheels have a 6x132 bolt pattern, an offset near 42mm, and a center bore of at least 74.5mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset