2008 GMC Acadia Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 GMC Acadia, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x132 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 74.6 mm |
| Offset (ET) | 50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2008 Acadia — Year-Specific Fitment Context
The 2008 GMC Acadia is in year 2 of 10 using the 6x132 pattern (2007–2016). Wheels from any 2007–2016 GMC Acadia are cross-compatible with the 2008 model. Across its full production run (2007–2024), the Acadia has also used: 6x120.
GMC Acadia Bolt Pattern by Year
The table below shows how the Acadia's wheel specifications have changed over the years. The 2008 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2007 | 6x132 | 74.6 | 50 |
| ▸ 2008 | 6x132 | 74.6 | 50 |
| 2009 | 6x132 | 74.6 | 50 |
| 2010 | 6x132 | 74.6 | 50 |
| 2011 | 6x132 | 74.6 | 50 |
| 2012 | 6x132 | 74.6 | 50 |
| 2013 | 6x132 | 74.6 | 50 |
| 2014 | 6x132 | 74.6 | 50 |
| 2015 | 6x132 | 74.6 | 50 |
| 2016 | 6x132 | 74.6 | 50 |
| 2017 | 6x120 | 66.9 | 50 |
| 2018 | 6x120 | 66.9 | 50 |
| 2019 | 6x120 | 66.9 | 50 |
| 2020 | 6x120 | 66.9 | 50 |
| 2021 | 6x120 | 66.9 | 50 |
| 2022 | 6x120 | 66.9 | 50 |
| 2023 | 6x120 | 66.9 | 50 |
| 2024 | 6x120 | 66.9 | 50 |
6x132 Pattern Context
This bolt pattern appears on 47 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x132:
Expert Buying Guide for 2008 GMC Acadia
For your 2008 GMC Acadia, the 6x132 bolt pattern is shared with 2007–2016 models, ensuring cross-compatibility. The 74.6mm center bore is critical: aftermarket wheels with a larger bore require hub-centric rings to prevent vibration and ensure proper load distribution. Offset is sensitive; the factory 50mm offset maintains suspension geometry and brake clearance. Deviating more than ±5mm may cause rubbing or handling issues. Always use 14x1.5 lug nuts with the correct seat type—factory wheels use a cone seat; aftermarket wheels may require ball or flat seats. Mismatched lug nuts can lead to wheel loosening. Safety first: verify all specs before installation.
Historical Fitment Data Reference
In our dataset, GMC Acadia appears from 2007 to 2024 (18 model years). Across model years, this model appears with 2 bolt patterns (6x120, 6x132).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lb after 50 miles of driving to ensure proper seating.
- ✅ When using aftermarket wheels, confirm hub-centric rings are installed to match the 74.6mm center bore.
- ✅ Avoid spacers unless necessary; if used, ensure extended lug studs and proper offset to prevent rubbing.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 GMC Acadia — Frequently Asked Questions
What is the bolt pattern for a 2008 GMC Acadia?
The 2008 GMC Acadia uses a 6x132 bolt pattern (also called lug pattern or PCD). The center bore is 74.6mm and the offset is 50mm.
What other years of GMC Acadia have the same bolt pattern as the 2008?
The GMC Acadia uses the 6x132 pattern from 2007 through 2016. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
Can I use spacers on my 2008 GMC Acadia?
Yes, but ensure the wheel spacers match the 6x132 bolt pattern and 74.6mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
Can I put aftermarket wheels on my 2008 GMC Acadia?
Absolutely. Just ensure the aftermarket wheels have a 6x132 bolt pattern, an offset near 50mm, and a center bore of at least 74.6mm (using hub rings if larger).
Do 2008 GMC Acadias use lug bolts or lug nuts?
The 2008 Acadia requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the center bore of a 2008 GMC Acadia?
The factory center bore (hub bore) for the 2008 GMC Acadia is 74.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset