2011 GMC Acadia Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 GMC Acadia, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x132 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 74.6 mm |
| Offset (ET) | 50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2011 Acadia — Year-Specific Fitment Context
The 2011 GMC Acadia is in year 5 of 10 using the 6x132 pattern (2007–2016). Wheels from any 2007–2016 GMC Acadia are cross-compatible with the 2011 model. Across its full production run (2007–2024), the Acadia has also used: 6x120.
GMC Acadia Bolt Pattern by Year
The table below shows how the Acadia's wheel specifications have changed over the years. The 2011 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2007 | 6x132 | 74.6 | 50 |
| 2008 | 6x132 | 74.6 | 50 |
| 2009 | 6x132 | 74.6 | 50 |
| 2010 | 6x132 | 74.6 | 50 |
| ▸ 2011 | 6x132 | 74.6 | 50 |
| 2012 | 6x132 | 74.6 | 50 |
| 2013 | 6x132 | 74.6 | 50 |
| 2014 | 6x132 | 74.6 | 50 |
| 2015 | 6x132 | 74.6 | 50 |
| 2016 | 6x132 | 74.6 | 50 |
| 2017 | 6x120 | 66.9 | 50 |
| 2018 | 6x120 | 66.9 | 50 |
| 2019 | 6x120 | 66.9 | 50 |
| 2020 | 6x120 | 66.9 | 50 |
| 2021 | 6x120 | 66.9 | 50 |
| 2022 | 6x120 | 66.9 | 50 |
| 2023 | 6x120 | 66.9 | 50 |
| 2024 | 6x120 | 66.9 | 50 |
6x132 Pattern Context
This bolt pattern appears on 47 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x132:
Expert Buying Guide for 2011 GMC Acadia
For your 2011 GMC Acadia, the bolt pattern is 6x132 with a center bore of 74.6mm. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibrations. The factory offset is 50mm; deviating significantly may cause rubbing or clearance issues. Always use the correct lug nuts: 14x1.5 thread pitch with a conical (60-degree) seat. Never use ball-seat lug nuts, as they can loosen. Re-torque after 50-100 miles. Wheels from 2007-2016 Acadia models are direct fit.
Historical Fitment Data Reference
In our dataset, GMC Acadia appears from 2007 to 2024 (18 model years). Across model years, this model appears with 2 bolt patterns (6x120, 6x132).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lbs after 50-100 miles of driving.
- ✅ Avoid wheels with offset below 40mm or above 55mm to prevent rubbing on suspension or fenders.
- ✅ If using aftermarket wheels, verify the center bore is at least 74.6mm; use hub-centric rings if larger.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 GMC Acadia — Frequently Asked Questions
What is the bolt pattern for a 2011 GMC Acadia?
The 2011 GMC Acadia uses a 6x132 bolt pattern (also called lug pattern or PCD). The center bore is 74.6mm and the offset is 50mm.
What other years of GMC Acadia have the same bolt pattern as the 2011?
The GMC Acadia uses the 6x132 pattern from 2007 through 2016. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
What is the PCD for a 2011 GMC Acadia?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2011 Acadia, the PCD is 6x132.
Will wheels from another GMC fit my 2011 Acadia?
Only if they share the exact same 6x132 bolt pattern, a compatible offset, and a center bore equal to or larger than 74.6mm.
What is the factory wheel offset for a 2011 GMC Acadia?
The OEM offset for the 2011 Acadia is typically around 50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What does 50mm offset mean for the 2011 Acadia?
An offset of 50mm means the wheel's mounting surface is 50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your GMC.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset