2014 GMC Acadia Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2014 GMC Acadia is 6x132. It has a center bore of 74.6 mm, an offset range of 50, and utilizes 14x1.5 (Cone seat, 22mm hex) fasteners tightened to 100 ft-lbs (135 Nm).
2014 GMC Acadia Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 6x132 |
|---|---|
| Center Bore (Hub Bore) | 74.6 mm |
| Offset Range (ET) | 50 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 22mm |
| Wheel Torque Specs | 100 ft-lbs (135 Nm) |
2014 Acadia — Year-Specific Fitment Context
The 2014 GMC Acadia is in year 8 of 10 using the 6x132 pattern (2007–2016). Wheels from any 2007–2016 GMC Acadia are cross-compatible with the 2014 model. Across its full production run (2007–2025), the Acadia has also used: 6x120.
GMC Acadia Bolt Pattern by Year
The table below shows how the Acadia's wheel specifications have changed over the years. The 2014 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2007 | 6x132 | 74.6 | 50 |
| 2008 | 6x132 | 74.6 | 50 |
| 2009 | 6x132 | 74.6 | 50 |
| 2010 | 6x132 | 74.6 | 50 |
| 2011 | 6x132 | 74.6 | 50 |
| 2012 | 6x132 | 74.6 | 50 |
| 2013 | 6x132 | 74.6 | 50 |
| ▸ 2014 | 6x132 | 74.6 | 50 |
| 2015 | 6x132 | 74.6 | 50 |
| 2016 | 6x132 | 74.6 | 50 |
| 2017 | 6x120 | 66.9 | 50 |
| 2018 | 6x120 | 66.9 | 50 |
| 2019 | 6x120 | 66.9 | 50 |
| 2020 | 6x120 | 66.9 | 50 |
| 2021 | 6x120 | 66.9 | 50 |
| 2022 | 6x120 | 66.9 | 50 |
| 2023 | 6x120 | 66.9 | 50 |
| 2024 | 6x120 | 66.9 | 50 |
| 2025 | 6x120 | 66.9 | 35-45 |
2014 GMC Acadia Wheel Interchange & Donor Fitment Guide (6x132)
The 6x132 bolt pattern is shared by 48 vehicles in our database (uncommon). For safe wheel swaps on the 2014 GMC Acadia, donor rims must match the 6x132 PCD and have a center bore of at least 74.6 mm:
DIRECT HUB MATCH Same 6x132 Pattern & Exact 74.6mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2009 Chevrolet Traverse | 74.5 mm (Exact) | 42 | N 14x1.50 (Cone) |
| 2007 Saturn Outlook | 74.6 mm (Exact) | 50 | 14x1.5 (Cone) |
| 2005 Saturn Relay | 74.5 mm (Exact) | 35-50mm | M12x1.5 (Cone) |
| 2008 Buick Enclave | 74.5 mm (Exact) | 50 | N 14x1.50 (Cone) |
| 2017 Cadillac XT5 | 74.5 mm (Exact) | 42 | N 14x1.50 (Cone) |
Expert Buying Guide for 2014 GMC Acadia
The 2014 GMC Acadia uses a 6x132 bolt pattern with a 74.6mm center bore and 50mm offset. When selecting aftermarket wheels, hub-centric rings are essential to match the 74.6mm bore, preventing vibrations and ensuring proper load distribution. The offset is sensitive; staying within ±5mm of 50mm is recommended to avoid rubbing or clearance issues with suspension and brakes. Always use lug nuts with the correct thread pitch (14x1.5) and seat type—factory wheels use a cone seat, while aftermarket may require ball or conical seats. Mismatched lug nuts can lead to wheel loosening. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, GMC Acadia appears from 2007 to 2025 (19 model years). Across model years, this model appears with 2 bolt patterns (6x120, 6x132).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 95.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lb after 50-100 miles of driving to ensure proper seating.
- ✅ Verify that aftermarket wheels have a center bore of at least 74.6mm; use hub-centric rings if larger.
- ✅ Avoid wheels with offset below 45mm or above 55mm to prevent rubbing on struts or fenders.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
2014 GMC Acadia — Frequently Asked Questions
What is the bolt pattern for a 2014 GMC Acadia?
The 2014 GMC Acadia uses a 6x132 bolt pattern (also called lug pattern or PCD). The center bore is 74.6mm and the offset is 50mm.
What other years of GMC Acadia have the same bolt pattern as the 2014?
The GMC Acadia uses the 6x132 pattern from 2007 through 2016. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.
What is the PCD for a 2014 GMC Acadia?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2014 Acadia, the PCD is 6x132.
Why is matching the 74.6mm center bore important for the 2014 Acadia?
The 74.6mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
How tight should I torque the lug nuts on a 2014 GMC Acadia?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What does 50mm offset mean for the 2014 Acadia?
An offset of 50mm means the wheel's mounting surface is 50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your GMC.
Need Full Fitment Data in Bulk?
Stop scraping or looking up cars one by one. Import 12,400+ verified vehicle specs (1992–2025) directly into your Shopify store, inventory system, or custom automotive software.
Explore Master Database (CSV) →