2021 Chevrolet Traverse Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2021 Chevrolet Traverse, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x120 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 66.9 mm |
| Offset (ET) | 50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2021 Traverse — Year-Specific Fitment Context
The 2021 Chevrolet Traverse is in year 3 of 6 using the 6x120 pattern (2019–2024). Wheels from any 2019–2024 Chevrolet Traverse are cross-compatible with the 2021 model. Across its full production run (2009–2024), the Traverse has also used: 6x132.
Chevrolet Traverse Bolt Pattern by Year
The table below shows how the Traverse's wheel specifications have changed over the years. The 2021 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2009 | 6x132 | 74.5 | 42 |
| 2010 | 6x132 | 74.5 | 42 |
| 2011 | 6x132 | 74.5 | 42 |
| 2012 | 6x132 | 74.5 | 42 |
| 2013 | 6x132 | 74.5 | 42 |
| 2014 | 6x132 | 74.5 | 42 |
| 2015 | 6x132 | 74.5 | 42 |
| 2016 | 6x132 | 74.5 | 42 |
| 2017 | 6x132 | 74.5 | 42 |
| 2018 | 6x132 | 74.5 | 42 |
| 2019 | 6x120 | 66.9 | 50 |
| 2020 | 6x120 | 66.9 | 50 |
| ▸ 2021 | 6x120 | 66.9 | 50 |
| 2022 | 6x120 | 66.9 | 50 |
| 2023 | 6x120 | 66.9 | 50 |
| 2024 | 6x120 | 66.9 | 50 |
6x120 Pattern Context
This bolt pattern appears on 76 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x120:
Expert Buying Guide for 2021 Chevrolet Traverse
For the 2021 Chevrolet Traverse, the 6x120 bolt pattern and 66.9mm center bore are critical. Aftermarket wheels must have a bore ≥66.9mm; use hub-centric rings to avoid vibration. The factory offset is 50mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use 14x1.5 lug nuts with the correct seat (conical 60° for most aftermarket wheels; verify factory seat type). Improper lug nut seating can lead to wheel loss. Re-torque after 50-100 miles. Avoid wheels from pre-2019 Traverse (6x132 pattern).
Historical Fitment Data Reference
In our dataset, Chevrolet Traverse appears from 2009 to 2024 (16 model years). Across model years, this model appears with 2 bolt patterns (6x120, 6x132).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 8.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lb after 50 miles of driving.
- ✅ Aftermarket wheels often require hub-centric rings; ensure they are aluminum or plastic and properly seated.
- ✅ Check brake caliper clearance when using wheels with offset below 45mm or above 55mm.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2021 Chevrolet Traverse — Frequently Asked Questions
What is the bolt pattern for a 2021 Chevrolet Traverse?
The 2021 Chevrolet Traverse uses a 6x120 bolt pattern (also called lug pattern or PCD). The center bore is 66.9mm and the offset is 50mm.
What other years of Chevrolet Traverse have the same bolt pattern as the 2021?
The Chevrolet Traverse uses the 6x120 pattern from 2019 through 2024. Wheels from any of these model years are dimensionally compatible with the 2021, provided the offset and center bore also match.
What is the PCD for a 2021 Chevrolet Traverse?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2021 Traverse, the PCD is 6x120.
How do I measure the bolt pattern on my 2021 Chevrolet?
The 2021 Traverse uses a 6x120 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Do 2021 Chevrolet Traverses use lug bolts or lug nuts?
The 2021 Traverse requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the factory wheel offset for a 2021 Chevrolet Traverse?
The OEM offset for the 2021 Traverse is typically around 50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset