2007 Buick Terraza Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Buick Terraza, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x115 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 70.3 mm |
| Offset (ET) | 52 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2007 Terraza — Year-Specific Fitment Context
The 2007 model year is the final year of the Buick Terraza's 5x115 bolt pattern run (since 2005). Wheels from any 2005–2007 Buick Terraza are cross-compatible with the 2007 model.
Buick Terraza Bolt Pattern by Year
The table below shows how the Terraza's wheel specifications have changed over the years. The 2007 model year is highlighted.
5x115 Pattern Context
This bolt pattern appears on 498 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x115:
Expert Buying Guide for 2007 Buick Terraza
When selecting wheels for your 2007 Buick Terraza, the 5x115 bolt pattern and 70.3mm center bore are critical. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 52mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.50) and seat type (conical/60-degree taper). Using incorrect lug nuts can lead to wheel loosening or damage. Verify that aftermarket wheels have sufficient load rating for the Terraza's weight. For safety, re-torque lug nuts after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Buick Terraza appears from 2005 to 2007 (3 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 ft-lbs after 50-100 miles of driving to ensure proper seating.
- ✅ If using aftermarket wheels, always install hub-centric rings (70.3mm ID to wheel bore OD) to prevent vibrations.
- ✅ Avoid wheels with offset below 47mm or above 57mm to prevent rubbing on suspension or body panels.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 Buick Terraza — Frequently Asked Questions
What is the bolt pattern for a 2007 Buick Terraza?
The 2007 Buick Terraza uses a 5x115 bolt pattern (also called lug pattern or PCD). The center bore is 70.3mm and the offset is 52mm.
What other years of Buick Terraza have the same bolt pattern as the 2007?
The Buick Terraza uses the 5x115 pattern from 2005 through 2007. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
What is the PCD for a 2007 Buick Terraza?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2007 Terraza, the PCD is 5x115.
Will wheels from another Buick fit my 2007 Terraza?
Only if they share the exact same 5x115 bolt pattern, a compatible offset, and a center bore equal to or larger than 70.3mm.
What is the factory wheel offset for a 2007 Buick Terraza?
The OEM offset for the 2007 Terraza is typically around 52mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Do 2007 Buick Terrazas use lug bolts or lug nuts?
The 2007 Terraza requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset