2010 Dodge Charger Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Dodge Charger, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x115 |
|---|---|
| Lug Nut / Bolt Size | N 14x1.50 |
| Center Bore (CB) | 71.6 mm |
| Offset (ET) | 22 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2010 Charger — Year-Specific Fitment Context
The 2010 Dodge Charger is in year 5 of 20 using the 5x115 pattern (2006–2025). Wheels from any 2006–2025 Dodge Charger are cross-compatible with the 2010 model.
Dodge Charger Bolt Pattern by Year
The table below shows how the Charger's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2006 | 5x115 | 71.6 | 22 |
| 2007 | 5x115 | 71.6 | 22 |
| 2008 | 5x115 | 71.6 | 22 |
| 2009 | 5x115 | 71.6 | 22 |
| ▸ 2010 | 5x115 | 71.6 | 22 |
| 2011 | 5x115 | 71.6 | 22 |
| 2012 | 5x115 | 71.6 | 22 |
| 2013 | 5x115 | 71.6 | 22 |
| 2014 | 5x115 | 71.6 | 18 |
| 2015 | 5x115 | 71.6 | 18 |
| 2016 | 5x115 | 71.6 | 18 |
| 2017 | 5x115 | 71.6 | 18 |
| 2018 | 5x115 | 71.6 | 18 |
| 2019 | 5x115 | 71.6 | 18 |
| 2020 | 5x115 | 71.5 | 24 |
| 2021 | 5x115 | 71.5 | 24 |
| 2022 | 5x115 | 71.5 | 24 |
| 2023 | 5x115 | 71.5 | 24 |
| 2025 | 5x115 | 71.5 | 24 |
5x115 Pattern Context
This bolt pattern appears on 498 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x115:
Expert Buying Guide for 2010 Dodge Charger
For your 2010 Dodge Charger, the 5x115 bolt pattern is shared with 2006–2025 models, ensuring cross-compatibility. However, the 71.6mm center bore is critical: aftermarket wheels with a larger bore require hub-centric rings to prevent vibration and stress on lug nuts. Offset is sensitive; the factory spec is 22mm, but a range of 18–26mm is acceptable. Exceeding this can cause rubbing or poor handling. Always use lug nuts with the correct thread pitch (14x1.50) and seat type (cone seat). Ball-seat or incorrect thread pitch can lead to wheel loss. Safety first: verify all specs before installation.
Historical Fitment Data Reference
In our dataset, Dodge Charger appears from 2006 to 2025 (19 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 6.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50–100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibration and damage.
- ✅ Check for caliper clearance with aftermarket wheels, as the 2010 Charger has large front brakes.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 Dodge Charger — Frequently Asked Questions
What is the bolt pattern for a 2010 Dodge Charger?
The 2010 Dodge Charger uses a 5x115 bolt pattern (also called lug pattern or PCD). The center bore is 71.6mm and the offset is 22mm.
What other years of Dodge Charger have the same bolt pattern as the 2010?
The Dodge Charger uses the 5x115 pattern from 2006 through 2025. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
Will wheels from another Dodge fit my 2010 Charger?
Only if they share the exact same 5x115 bolt pattern, a compatible offset, and a center bore equal to or larger than 71.6mm.
Can I use spacers on my 2010 Dodge Charger?
Yes, but ensure the wheel spacers match the 5x115 bolt pattern and 71.6mm center bore. Also verify that you have enough thread engagement for your N 14x1.50 hardware.
What is the center bore of a 2010 Dodge Charger?
The factory center bore (hub bore) for the 2010 Dodge Charger is 71.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the PCD for a 2010 Dodge Charger?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2010 Charger, the PCD is 5x115.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset