2012 Dodge Charger Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2012 Dodge Charger, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x115 |
|---|---|
| Lug Nut / Bolt Size | N 14x1.50 |
| Center Bore (CB) | 71.6 mm |
| Offset (ET) | 22 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2012 Charger — Year-Specific Fitment Context
The 2012 Dodge Charger is in year 7 of 20 using the 5x115 pattern (2006–2025). Wheels from any 2006–2025 Dodge Charger are cross-compatible with the 2012 model.
Dodge Charger Bolt Pattern by Year
The table below shows how the Charger's wheel specifications have changed over the years. The 2012 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2006 | 5x115 | 71.6 | 22 |
| 2007 | 5x115 | 71.6 | 22 |
| 2008 | 5x115 | 71.6 | 22 |
| 2009 | 5x115 | 71.6 | 22 |
| 2010 | 5x115 | 71.6 | 22 |
| 2011 | 5x115 | 71.6 | 22 |
| ▸ 2012 | 5x115 | 71.6 | 22 |
| 2013 | 5x115 | 71.6 | 22 |
| 2014 | 5x115 | 71.6 | 18 |
| 2015 | 5x115 | 71.6 | 18 |
| 2016 | 5x115 | 71.6 | 18 |
| 2017 | 5x115 | 71.6 | 18 |
| 2018 | 5x115 | 71.6 | 18 |
| 2019 | 5x115 | 71.6 | 18 |
| 2020 | 5x115 | 71.5 | 24 |
| 2021 | 5x115 | 71.5 | 24 |
| 2022 | 5x115 | 71.5 | 24 |
| 2023 | 5x115 | 71.5 | 24 |
| 2025 | 5x115 | 71.5 | 24 |
5x115 Pattern Context
This bolt pattern appears on 498 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x115:
Expert Buying Guide for 2012 Dodge Charger
For your 2012 Dodge Charger, the 71.6mm center bore is critical. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The 22mm offset range is sensitive; deviations affect handling and suspension clearance. Always verify offset to avoid rubbing or stress on bearings. Lug nuts must be 14x1.50 thread pitch with a conical (60-degree) seat. Using incorrect seat type (e.g., ball seat) can cause wheel loosening. Re-torque after 50-100 miles. Wheels from 2006-2025 Chargers are compatible, but confirm bore and offset.
Historical Fitment Data Reference
In our dataset, Dodge Charger appears from 2006 to 2025 (19 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 6.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 ft-lbs after 50-100 miles of driving.
- ✅ Avoid wheels with offset below 18mm or above 26mm to prevent rubbing or bearing load.
- ✅ Always use hub-centric rings if aftermarket wheels have a bore larger than 71.6mm.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2012 Dodge Charger — Frequently Asked Questions
What is the bolt pattern for a 2012 Dodge Charger?
The 2012 Dodge Charger uses a 5x115 bolt pattern (also called lug pattern or PCD). The center bore is 71.6mm and the offset is 22mm.
What other years of Dodge Charger have the same bolt pattern as the 2012?
The Dodge Charger uses the 5x115 pattern from 2006 through 2025. Wheels from any of these model years are dimensionally compatible with the 2012, provided the offset and center bore also match.
What is the factory wheel offset for a 2012 Dodge Charger?
The OEM offset for the 2012 Charger is typically around 22mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How do I measure the bolt pattern on my 2012 Dodge?
The 2012 Charger uses a 5x115 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Do 2012 Dodge Chargers use lug bolts or lug nuts?
The 2012 Charger requires N 14x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the center bore of a 2012 Dodge Charger?
The factory center bore (hub bore) for the 2012 Dodge Charger is 71.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset