2008 Dodge Charger Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Dodge Charger, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x115 |
|---|---|
| Lug Nut / Bolt Size | N 14x1.50 |
| Center Bore (CB) | 71.6 mm |
| Offset (ET) | 22 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2008 Charger — Year-Specific Fitment Context
The 2008 Dodge Charger is in year 3 of 20 using the 5x115 pattern (2006–2025). Wheels from any 2006–2025 Dodge Charger are cross-compatible with the 2008 model.
Dodge Charger Bolt Pattern by Year
The table below shows how the Charger's wheel specifications have changed over the years. The 2008 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2006 | 5x115 | 71.6 | 22 |
| 2007 | 5x115 | 71.6 | 22 |
| ▸ 2008 | 5x115 | 71.6 | 22 |
| 2009 | 5x115 | 71.6 | 22 |
| 2010 | 5x115 | 71.6 | 22 |
| 2011 | 5x115 | 71.6 | 22 |
| 2012 | 5x115 | 71.6 | 22 |
| 2013 | 5x115 | 71.6 | 22 |
| 2014 | 5x115 | 71.6 | 18 |
| 2015 | 5x115 | 71.6 | 18 |
| 2016 | 5x115 | 71.6 | 18 |
| 2017 | 5x115 | 71.6 | 18 |
| 2018 | 5x115 | 71.6 | 18 |
| 2019 | 5x115 | 71.6 | 18 |
| 2020 | 5x115 | 71.5 | 24 |
| 2021 | 5x115 | 71.5 | 24 |
| 2022 | 5x115 | 71.5 | 24 |
| 2023 | 5x115 | 71.5 | 24 |
| 2025 | 5x115 | 71.5 | 24 |
5x115 Pattern Context
This bolt pattern appears on 498 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x115:
Expert Buying Guide for 2008 Dodge Charger
For your 2008 Dodge Charger, the 5x115 bolt pattern and 71.6mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The offset range is sensitive; the factory 22mm offset is ideal for suspension geometry. Deviating more than ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (14x1.50) and seat type (cone seat for most aftermarket wheels; ball seat for factory). Improper lug nuts can lead to wheel loosening. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Dodge Charger appears from 2006 to 2025 (19 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 6.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 ft-lbs after 50-100 miles of driving.
- ✅ Verify hub-centric ring inner diameter matches 71.6mm; outer diameter must match wheel bore.
- ✅ Avoid spacers unless using extended studs; they can alter offset and stress hubs.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Dodge Charger — Frequently Asked Questions
What is the bolt pattern for a 2008 Dodge Charger?
The 2008 Dodge Charger uses a 5x115 bolt pattern (also called lug pattern or PCD). The center bore is 71.6mm and the offset is 22mm.
What other years of Dodge Charger have the same bolt pattern as the 2008?
The Dodge Charger uses the 5x115 pattern from 2006 through 2025. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
Do 2008 Dodge Chargers use lug bolts or lug nuts?
The 2008 Charger requires N 14x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What lug nut size does the 2008 Dodge Charger use?
The 2008 Dodge Charger uses N 14x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I put aftermarket wheels on my 2008 Dodge Charger?
Absolutely. Just ensure the aftermarket wheels have a 5x115 bolt pattern, an offset near 22mm, and a center bore of at least 71.6mm (using hub rings if larger).
How do I measure the bolt pattern on my 2008 Dodge?
The 2008 Charger uses a 5x115 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset