2017 Buick Verano Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2017 Buick Verano, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x115 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 70.3 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2017 Verano — Year-Specific Fitment Context
The 2017 model year is the final year of the Buick Verano's 5x115 bolt pattern run (since 2012). Wheels from any 2012–2017 Buick Verano are cross-compatible with the 2017 model.
Buick Verano Bolt Pattern by Year
The table below shows how the Verano's wheel specifications have changed over the years. The 2017 model year is highlighted.
5x115 Pattern Context
This bolt pattern appears on 498 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x115:
Expert Buying Guide for 2017 Buick Verano
For the 2017 Buick Verano, the 5x115 bolt pattern and 70.3mm center bore are critical. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The offset is sensitive: stock is 45mm, but a range of 35-50mm may fit with careful checking. Avoid offsets below 35mm to prevent rubbing on struts or fenders. Always use the correct lug nuts: 12x1.5 thread pitch with a conical (60-degree) seat. Using wrong seat type (e.g., ball seat) can cause wheel loosening. Re-torque after 50-100 miles. Verify brake caliper clearance, as some aftermarket wheels may interfere.
Historical Fitment Data Reference
In our dataset, Buick Verano appears from 2012 to 2017 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 ft-lbs after 50-100 miles of driving.
- ✅ Use hub-centric rings (70.3mm ID to aftermarket bore) to avoid vibrations.
- ✅ Check inner clearance for brake calipers; some 18-inch wheels may require spacers.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2017 Buick Verano — Frequently Asked Questions
What is the bolt pattern for a 2017 Buick Verano?
The 2017 Buick Verano uses a 5x115 bolt pattern (also called lug pattern or PCD). The center bore is 70.3mm and the offset is 45mm.
What other years of Buick Verano have the same bolt pattern as the 2017?
The Buick Verano uses the 5x115 pattern from 2012 through 2017. Wheels from any of these model years are dimensionally compatible with the 2017, provided the offset and center bore also match.
What is the factory wheel offset for a 2017 Buick Verano?
The OEM offset for the 2017 Verano is typically around 45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How tight should I torque the lug nuts on a 2017 Buick Verano?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I put aftermarket wheels on my 2017 Buick Verano?
Absolutely. Just ensure the aftermarket wheels have a 5x115 bolt pattern, an offset near 45mm, and a center bore of at least 70.3mm (using hub rings if larger).
Will wheels from another Buick fit my 2017 Verano?
Only if they share the exact same 5x115 bolt pattern, a compatible offset, and a center bore equal to or larger than 70.3mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset