2026 Cadillac Celestiq Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Cadillac Celestiq is 6x132. It has a center bore of 66.9 mm, an offset range of 50, and utilizes 14x1.5 (Cone seat, 22mm hex) fasteners tightened to 140 ft-lbs (190 Nm).
2026 Cadillac Celestiq Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 6x132 |
|---|---|
| Center Bore (Hub Bore) | 66.9 mm |
| Offset Range (ET) | 50 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 22mm |
| Wheel Torque Specs | 140 ft-lbs (190 Nm) |
2026 Celestiq — Year-Specific Fitment Context
The 2026 model year is the final year of the Cadillac Celestiq's 6x132 bolt pattern run (since 2024). Wheels from any 2024–2026 Cadillac Celestiq are cross-compatible with the 2026 model.
Cadillac Celestiq Bolt Pattern by Year
Looking for all generations? View the complete Cadillac Celestiq (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the Celestiq's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Cadillac Celestiq Wheel Interchange & Donor Fitment Guide (6x132)
The 6x132 bolt pattern is shared by 52 vehicles in our database (uncommon). For safe wheel swaps on the 2026 Cadillac Celestiq, donor rims must match the 6x132 PCD and have a center bore of at least 66.9 mm:
DIRECT HUB MATCH Same 6x132 Pattern & Exact 66.9mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 Cadillac Escalade IQ | 66.9 mm (Exact) | 50 | 14x1.5 (Cone) |
| 2026 Cadillac Escalade IQL | 66.9 mm (Exact) | 50 | 14x1.5 (Cone) |
| 2025 Cadillac OPTIQ | 66.9 mm (Exact) | 50 | 14x1.5 (Cone) |
| 2026 Cadillac Vistiq | 66.9 mm (Exact) | 50 | 14x1.5 (Cone) |
| 2023 Cadillac LYRIQ | 66.9 mm (Exact) | 50 | 14x1.5 (Cone) |
HUB RING FITMENT Same 6x132 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2007 Saturn Outlook | 74.6 mm | 74.6mm → 66.9mm |
50 |
| 2005 Saturn Relay | 74.5 mm | 74.5mm → 66.9mm |
35-50mm |
| 2008 Buick Enclave | 74.5 mm | 74.5mm → 66.9mm |
50 |
| 2017 Cadillac XT5 | 74.5 mm | 74.5mm → 66.9mm |
42 |
| 2009 Chevrolet Traverse | 74.5 mm | 74.5mm → 66.9mm |
42 |
| 2007 GMC Acadia | 74.6 mm | 74.6mm → 66.9mm |
50 |
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Cadillac Celestiq — Frequently Asked Questions
What is the bolt pattern for a 2026 Cadillac Celestiq?
The 2026 Cadillac Celestiq uses a 6x132 bolt pattern (also called lug pattern or PCD). The center bore is 66.9mm and the offset is 50mm.
What other years of Cadillac Celestiq have the same bolt pattern as the 2026?
The Cadillac Celestiq uses the 6x132 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2026 Cadillac?
The 2026 Celestiq uses a 6x132 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I use spacers on my 2026 Cadillac Celestiq?
Yes, but ensure the wheel spacers match the 6x132 bolt pattern and 66.9mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
Will wheels from another Cadillac fit my 2026 Celestiq?
Only if they share the exact same 6x132 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.9mm.
How tight should I torque the lug nuts on a 2026 Cadillac Celestiq?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →