2026 Chevrolet 4500HG Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Chevrolet 4500HG is 8x165.1 (8x6.5"). It has a center bore of 116.6 mm, an offset range of Not Applicable, and utilizes 14x1.5 (Flat seat, 22mm hex) fasteners tightened to 140 ft-lbs (190 Nm).
2026 Chevrolet 4500HG Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Center Bore (Hub Bore) | 116.6 mm |
| Offset Range (ET) | Not Applicable |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 22mm |
| Wheel Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 8x165.1 is commonly referred to as 8x6.5" in US Standard.
2026 4500HG — Year-Specific Fitment Context
The 2026 model year is the final year of the Chevrolet 4500HG's 8x165.1 bolt pattern run (since 2024). Wheels from any 2024–2026 Chevrolet 4500HG are cross-compatible with the 2026 model.
Chevrolet 4500HG Bolt Pattern by Year
Looking for all generations? View the complete Chevrolet 4500HG (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the 4500HG's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Chevrolet 4500HG Wheel Interchange & Donor Fitment Guide (8x165.1)
The 8x165.1 bolt pattern is shared by 867 vehicles in our database (common). For safe wheel swaps on the 2026 Chevrolet 4500HG, donor rims must match the 8x165.1 PCD and have a center bore of at least 116.6 mm:
DIRECT HUB MATCH Same 8x165.1 Pattern & Exact 116.6mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2024 GMC Sierra EV | 116.7 mm (Exact) | 10-25mm | M14x1.5 (Cone) |
| 1995 GMC Suburban 2500 | 116.7 mm (Exact) | 20 | 14x1.5 (Cone) |
| 2025 Chevrolet Silverado EV | 116.7 mm (Exact) | 20-40mm | M14x1.5 (Cone) |
| 1997 Chevrolet Suburban 2500 | 116.6 mm (Exact) | 26 | N 14x1.50 (Cone) |
| 1999 Chevrolet 2500 Crew Cab | 116.7 mm (Exact) | 20-40 | 14x1.5 (Cone) |
| 1992 Chevrolet 2500 Extended Cab | 116.7 mm (Exact) | 20 | 14x1.5 (Cone) |
HUB RING FITMENT Same 8x165.1 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2011 Ford E150 Passenger | 124.9 mm | 124.9mm → 116.6mm |
0-15mm |
| 2025 GMC HUMMER EV Pickup | 124.9 mm | 124.9mm → 116.6mm |
25-35 |
| 2021 Nissan NV1500 Cargo | 131.0 mm | 131.0mm → 116.6mm |
30 |
| 2021 Nissan NV2500 HD Cargo | 131.0 mm | 131.0mm → 116.6mm |
30 |
| 2021 Nissan NV3500 HD Cargo | 131.0 mm | 131.0mm → 116.6mm |
30 |
| 2021 Nissan NV3500 HD Passenger | 131.0 mm | 131.0mm → 116.6mm |
30 |
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Chevrolet 4500HG — Frequently Asked Questions
What is the bolt pattern for a 2026 Chevrolet 4500HG?
The 2026 Chevrolet 4500HG uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 116.6mm and the offset is Not Applicablemm.
What other years of Chevrolet 4500HG have the same bolt pattern as the 2026?
The Chevrolet 4500HG uses the 8x165.1 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
Will wheels from another Chevrolet fit my 2026 4500HG?
Only if they share the exact same 8x165.1 bolt pattern, a compatible offset, and a center bore equal to or larger than 116.6mm.
Can I use spacers on my 2026 Chevrolet 4500HG?
Yes, but ensure the wheel spacers match the 8x165.1 bolt pattern and 116.6mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
How do I measure the bolt pattern on my 2026 Chevrolet?
The 2026 4500HG uses a 8x165.1 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What does Not Applicablemm offset mean for the 2026 4500HG?
An offset of Not Applicablemm means the wheel's mounting surface is Not Applicablemm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Chevrolet.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →