2016 Chevrolet Cruze Limited Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2016 Chevrolet Cruze Limited, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x105 |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 56.6 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2016 Cruze Limited — Year-Specific Fitment Context
The 2016 is the only model year of the Chevrolet Cruze Limited in our database using the 5x105 bolt pattern.
5x105 Pattern Context
This bolt pattern appears on 50 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 5x105:
Expert Buying Guide for 2016 Chevrolet Cruze Limited
The 2016 Chevrolet Cruze Limited is unique with a 5x105 bolt pattern, shared only with this model year. When selecting aftermarket wheels, the 56.6mm center bore is critical; wheels with a larger bore require hub-centric rings to prevent vibration and ensure proper load distribution. Offset is sensitive: the factory 40mm offset maintains optimal suspension geometry and tire clearance. Deviating significantly can cause rubbing or handling issues. Safety warning: always use lug nuts with the correct 12x1.5 thread pitch and matching seat type (cone or ball) to avoid wheel loosening. Improper seating can lead to catastrophic failure. Verify all specifications before installation.
Historical Fitment Data Reference
In our dataset, Chevrolet Cruze Limited appears from 2016 to 2016 (1 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 ft-lbs after 50 miles of driving to ensure proper seating.
- ✅ Aftermarket wheels often have a larger center bore; always use hub-centric rings to match the 56.6mm hub.
- ✅ Avoid offsets below 35mm or above 45mm to prevent rubbing on suspension or fenders.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2016 Chevrolet Cruze Limited — Frequently Asked Questions
What is the bolt pattern for a 2016 Chevrolet Cruze Limited?
The 2016 Chevrolet Cruze Limited uses a 5x105 bolt pattern (also called lug pattern or PCD). The center bore is 56.6mm and the offset is 40mm.
Do 2016 Chevrolet Cruze Limiteds use lug bolts or lug nuts?
The 2016 Cruze Limited requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I put aftermarket wheels on my 2016 Chevrolet Cruze Limited?
Absolutely. Just ensure the aftermarket wheels have a 5x105 bolt pattern, an offset near 40mm, and a center bore of at least 56.6mm (using hub rings if larger).
How do I measure the bolt pattern on my 2016 Chevrolet?
The 2016 Cruze Limited uses a 5x105 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
How tight should I torque the lug nuts on a 2016 Chevrolet Cruze Limited?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Will wheels from another Chevrolet fit my 2016 Cruze Limited?
Only if they share the exact same 5x105 bolt pattern, a compatible offset, and a center bore equal to or larger than 56.6mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset