1997 Chrysler Cirrus Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1997 Chrysler Cirrus, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 42 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1997 Cirrus — Year-Specific Fitment Context
The 1997 Chrysler Cirrus is in year 3 of 6 using the 5x100 pattern (1995–2000). Wheels from any 1995–2000 Chrysler Cirrus are cross-compatible with the 1997 model.
Chrysler Cirrus Bolt Pattern by Year
The table below shows how the Cirrus's wheel specifications have changed over the years. The 1997 model year is highlighted.
5x100 Pattern Context
This bolt pattern appears on 447 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x100:
Expert Buying Guide for 1997 Chrysler Cirrus
For your 1997 Chrysler Cirrus, the 5x100 bolt pattern and 57.1mm center bore are critical. Aftermarket wheels often have a larger bore (e.g., 73.1mm); you must use hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 42mm; staying within ±5mm is recommended to avoid rubbing or clearance issues. Always verify lug nut thread pitch (12x1.5) and seat type—use conical (60-degree) or ball seat nuts as required by the wheel. Never mix seat types; improper seating can cause lug nuts to loosen. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Chrysler Cirrus appears from 1995 to 2000 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings if aftermarket wheels have a larger center bore than 57.1mm.
- ✅ Re-torque lug nuts to 80-100 ft-lbs after 50-100 miles of driving.
- ✅ Check that aftermarket wheels have sufficient clearance for brake calipers and suspension components.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1997 Chrysler Cirrus — Frequently Asked Questions
What is the bolt pattern for a 1997 Chrysler Cirrus?
The 1997 Chrysler Cirrus uses a 5x100 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 42mm.
What other years of Chrysler Cirrus have the same bolt pattern as the 1997?
The Chrysler Cirrus uses the 5x100 pattern from 1995 through 2000. Wheels from any of these model years are dimensionally compatible with the 1997, provided the offset and center bore also match.
What lug nut size does the 1997 Chrysler Cirrus use?
The 1997 Chrysler Cirrus uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I put aftermarket wheels on my 1997 Chrysler Cirrus?
Absolutely. Just ensure the aftermarket wheels have a 5x100 bolt pattern, an offset near 42mm, and a center bore of at least 57.1mm (using hub rings if larger).
What is the PCD for a 1997 Chrysler Cirrus?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1997 Cirrus, the PCD is 5x100.
Can I use spacers on my 1997 Chrysler Cirrus?
Yes, but ensure the wheel spacers match the 5x100 bolt pattern and 57.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset