1993 Chrysler Fifth Ave Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1993 Chrysler Fifth Ave, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 5x100
Lug Nut / Bolt Size M12x1.5
Center Bore (CB) 57.1 mm
Offset (ET) 35-45mm
Torque Specs 80 ft-lbs (108 Nm)

1993 Fifth Ave — Year-Specific Fitment Context

The 1993 model year is the final year of the Chrysler Fifth Ave's 5x100 bolt pattern run (since 1992). Wheels from any 1992–1993 Chrysler Fifth Ave are cross-compatible with the 1993 model.

Chrysler Fifth Ave Bolt Pattern by Year

The table below shows how the Fifth Ave's wheel specifications have changed over the years. The 1993 model year is highlighted.

Year Bolt Pattern Center Bore Offset
1992 5x100 57.1 35-45mm
▸ 1993 5x100 57.1 35-45mm

Fitment Notes

The 1993 Chrysler Fifth Ave has a bolt pattern of 5x100.

This means it is a 5 lug pattern with a circle diameter of 100mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.

Year-to-Year Fitment Context

In our dataset, Chrysler Fifth Ave appears from 1992 to 1993 (2 model years).

Across recorded model years, this model generally keeps the same bolt pattern.

5x100 Pattern Context

This bolt pattern appears on 447 vehicles in our current database and is considered moderately common.

Examples of other vehicles using 5x100:

1993 Chrysler Fifth Ave — Frequently Asked Questions

What is the bolt pattern for a 1993 Chrysler Fifth Ave?

The 1993 Chrysler Fifth Ave uses a 5x100 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 35-45mmmm.

What other years of Chrysler Fifth Ave have the same bolt pattern as the 1993?

The Chrysler Fifth Ave uses the 5x100 pattern from 1992 through 1993. Wheels from any of these model years are dimensionally compatible with the 1993, provided the offset and center bore also match.

Can I put aftermarket wheels on my 1993 Chrysler Fifth Ave?

Absolutely. Just ensure the aftermarket wheels have a 5x100 bolt pattern, an offset near 35-45mmmm, and a center bore of at least 57.1mm (using hub rings if larger).

What is the factory wheel offset for a 1993 Chrysler Fifth Ave?

The OEM offset for the 1993 Fifth Ave is typically around 35-45mmmm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.

How tight should I torque the lug nuts on a 1993 Chrysler Fifth Ave?

Refer to your owner's manual for exact specs, but always tighten the M12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.

Do 1993 Chrysler Fifth Aves use lug bolts or lug nuts?

The 1993 Fifth Ave requires M12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.

Fitment Checklist Before You Buy Wheels

Editorial Fitment Notes

Chrysler Fifth Ave is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.

Data Quality & Review

Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.

Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team

If you find a discrepancy for 1993 Chrysler Fifth Ave, please report it via our About page contact so we can verify and update this record.

Chrysler Fifth Ave By Year

1992 1993

Other Chrysler Models

200 300 300M Aspen Cirrus Concorde Crossfire Fifth Ave Grand Voyager Imperial LHS LeBaron New Yorker PT Cruiser Pacifica Pacifica Hybrid Prowler Sebring Town & Country Voyager