2009 Chrysler PT Cruiser Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2009 Chrysler PT Cruiser, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2009 PT Cruiser — Year-Specific Fitment Context
The 2009 Chrysler PT Cruiser is in year 9 of 10 using the 5x100 pattern (2001–2010). Wheels from any 2001–2010 Chrysler PT Cruiser are cross-compatible with the 2009 model.
Chrysler PT Cruiser Bolt Pattern by Year
The table below shows how the PT Cruiser's wheel specifications have changed over the years. The 2009 model year is highlighted.
Fitment Notes
The 2009 Chrysler PT Cruiser has a bolt pattern of 5x100.
This means it is a 5 lug pattern with a circle diameter of 100mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Chrysler PT Cruiser appears from 2001 to 2010 (10 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x100 Pattern Context
This bolt pattern appears on 447 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x100:
2009 Chrysler PT Cruiser — Frequently Asked Questions
What is the bolt pattern for a 2009 Chrysler PT Cruiser?
The 2009 Chrysler PT Cruiser uses a 5x100 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 40mm.
What other years of Chrysler PT Cruiser have the same bolt pattern as the 2009?
The Chrysler PT Cruiser uses the 5x100 pattern from 2001 through 2010. Wheels from any of these model years are dimensionally compatible with the 2009, provided the offset and center bore also match.
What lug nut size does the 2009 Chrysler PT Cruiser use?
The 2009 Chrysler PT Cruiser uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I put aftermarket wheels on my 2009 Chrysler PT Cruiser?
Absolutely. Just ensure the aftermarket wheels have a 5x100 bolt pattern, an offset near 40mm, and a center bore of at least 57.1mm (using hub rings if larger).
Do 2009 Chrysler PT Cruisers use lug bolts or lug nuts?
The 2009 PT Cruiser requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the center bore of a 2009 Chrysler PT Cruiser?
The factory center bore (hub bore) for the 2009 Chrysler PT Cruiser is 57.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Chrysler PT Cruiser is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2001-2010 (10 model years).
- Observed bolt-pattern variants: 1 (5x100).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2009 Chrysler PT Cruiser, please report it via our About page contact so we can verify and update this record.