2000 Daewoo Leganza Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 Daewoo Leganza, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 5x114.3 (5x4.5")
Lug Nut / Bolt Size N 12x1.50
Center Bore (CB) 56.6 mm
Offset (ET) 49
Torque Specs 80 ft-lbs (108 Nm)

2000 Leganza — Year-Specific Fitment Context

The 2000 Daewoo Leganza is in year 2 of 4 using the 5x114.3 pattern (1999–2002). Wheels from any 1999–2002 Daewoo Leganza are cross-compatible with the 2000 model.

Daewoo Leganza Bolt Pattern by Year

The table below shows how the Leganza's wheel specifications have changed over the years. The 2000 model year is highlighted.

Year Bolt Pattern Center Bore Offset
1999 5x114.3 56.6 49
▸ 2000 5x114.3 56.6 49
2001 5x114.3 56.6 49
2002 5x114.3 56.6 49

Fitment Notes

The 2000 Daewoo Leganza has a bolt pattern of 5x114.3.

Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".

This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.

Year-to-Year Fitment Context

In our dataset, Daewoo Leganza appears from 1999 to 2002 (4 model years).

Across recorded model years, this model generally keeps the same bolt pattern.

5x114.3 Pattern Context

This bolt pattern appears on 2902 vehicles in our current database and is considered very common.

Examples of other vehicles using 5x114.3:

2000 Daewoo Leganza — Frequently Asked Questions

What is the bolt pattern for a 2000 Daewoo Leganza?

The 2000 Daewoo Leganza uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 56.6mm and the offset is 49mm.

What other years of Daewoo Leganza have the same bolt pattern as the 2000?

The Daewoo Leganza uses the 5x114.3 pattern from 1999 through 2002. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.

Do 2000 Daewoo Leganzas use lug bolts or lug nuts?

The 2000 Leganza requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.

What is the center bore of a 2000 Daewoo Leganza?

The factory center bore (hub bore) for the 2000 Daewoo Leganza is 56.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.

What is the factory wheel offset for a 2000 Daewoo Leganza?

The OEM offset for the 2000 Leganza is typically around 49mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.

What is the PCD for a 2000 Daewoo Leganza?

PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2000 Leganza, the PCD is 5x114.3.

Fitment Checklist Before You Buy Wheels

Editorial Fitment Notes

Daewoo Leganza is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.

Data Quality & Review

Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.

Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team

If you find a discrepancy for 2000 Daewoo Leganza, please report it via our About page contact so we can verify and update this record.

Daewoo Leganza By Year

1999 2000 2001 2002

Other Daewoo Models

Lanos Leganza Nubira