1999 Daewoo Nubira Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1999 Daewoo Nubira, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 56.6 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1999 Nubira — Year-Specific Fitment Context
The 1999 model year marks the beginning of the Daewoo Nubira's 4x100 bolt pattern era, which continued through 2002 (4 consecutive years). Wheels from any 1999–2002 Daewoo Nubira are cross-compatible with the 1999 model.
Daewoo Nubira Bolt Pattern by Year
The table below shows how the Nubira's wheel specifications have changed over the years. The 1999 model year is highlighted.
Fitment Notes
The 1999 Daewoo Nubira has a bolt pattern of 4x100.
This means it is a 4 lug pattern with a circle diameter of 100mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Daewoo Nubira appears from 1999 to 2002 (4 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
1999 Daewoo Nubira — Frequently Asked Questions
What is the bolt pattern for a 1999 Daewoo Nubira?
The 1999 Daewoo Nubira uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.6mm and the offset is 46mm.
What other years of Daewoo Nubira have the same bolt pattern as the 1999?
The Daewoo Nubira uses the 4x100 pattern from 1999 through 2002. Wheels from any of these model years are dimensionally compatible with the 1999, provided the offset and center bore also match.
Can I put aftermarket wheels on my 1999 Daewoo Nubira?
Absolutely. Just ensure the aftermarket wheels have a 4x100 bolt pattern, an offset near 46mm, and a center bore of at least 56.6mm (using hub rings if larger).
What is the factory wheel offset for a 1999 Daewoo Nubira?
The OEM offset for the 1999 Nubira is typically around 46mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the PCD for a 1999 Daewoo Nubira?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1999 Nubira, the PCD is 4x100.
Will wheels from another Daewoo fit my 1999 Nubira?
Only if they share the exact same 4x100 bolt pattern, a compatible offset, and a center bore equal to or larger than 56.6mm.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Daewoo Nubira is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1999-2002 (4 model years).
- Observed bolt-pattern variants: 1 (4x100).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 1999 Daewoo Nubira, please report it via our About page contact so we can verify and update this record.