2002 Daewoo Nubira Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2002 Daewoo Nubira, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 56.6 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2002 Nubira — Year-Specific Fitment Context
The 2002 model year is the final year of the Daewoo Nubira's 4x100 bolt pattern run (since 1999). Wheels from any 1999–2002 Daewoo Nubira are cross-compatible with the 2002 model.
Daewoo Nubira Bolt Pattern by Year
The table below shows how the Nubira's wheel specifications have changed over the years. The 2002 model year is highlighted.
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
Expert Buying Guide for 2002 Daewoo Nubira
For your 2002 Daewoo Nubira, the 4x100 bolt pattern and 56.6mm center bore are critical. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure load is on the hub, not the lug nuts. Offset is sensitive: stock is 46mm; deviations beyond ±5mm may cause rubbing or poor handling. Always use lug nuts with the correct thread pitch (12x1.50) and seat type (cone or ball seat, matching the wheel). Never mix seat types. Torque to manufacturer specs (typically 80-90 ft-lbs) and re-torque after 50 miles. Wheels from 1999-2002 Nubira are direct fit.
Historical Fitment Data Reference
In our dataset, Daewoo Nubira appears from 1999 to 2002 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Use hub-centric rings (56.6mm ID to aftermarket bore) to avoid vibration and ensure proper centering.
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50 miles of driving to account for settling.
- ✅ Verify wheel offset stays within 41-51mm to prevent rubbing on suspension or fenders.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2002 Daewoo Nubira — Frequently Asked Questions
What is the bolt pattern for a 2002 Daewoo Nubira?
The 2002 Daewoo Nubira uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.6mm and the offset is 46mm.
What other years of Daewoo Nubira have the same bolt pattern as the 2002?
The Daewoo Nubira uses the 4x100 pattern from 1999 through 2002. Wheels from any of these model years are dimensionally compatible with the 2002, provided the offset and center bore also match.
Will wheels from another Daewoo fit my 2002 Nubira?
Only if they share the exact same 4x100 bolt pattern, a compatible offset, and a center bore equal to or larger than 56.6mm.
Can I use spacers on my 2002 Daewoo Nubira?
Yes, but ensure the wheel spacers match the 4x100 bolt pattern and 56.6mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
How do I measure the bolt pattern on my 2002 Daewoo?
The 2002 Nubira uses a 4x100 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Do 2002 Daewoo Nubiras use lug bolts or lug nuts?
The 2002 Nubira requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset