2007 Pontiac G5 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Pontiac G5, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 56.6 mm |
| Offset (ET) | 42 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2007 G5 — Year-Specific Fitment Context
The 2007 model year marks the beginning of the Pontiac G5's 4x100 bolt pattern era, which continued through 2009 (3 consecutive years). Wheels from any 2007–2009 Pontiac G5 are cross-compatible with the 2007 model.
Pontiac G5 Bolt Pattern by Year
The table below shows how the G5's wheel specifications have changed over the years. The 2007 model year is highlighted.
Fitment Notes
The 2007 Pontiac G5 has a bolt pattern of 4x100.
This means it is a 4 lug pattern with a circle diameter of 100mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Pontiac G5 appears from 2007 to 2009 (3 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
2007 Pontiac G5 — Frequently Asked Questions
What is the bolt pattern for a 2007 Pontiac G5?
The 2007 Pontiac G5 uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.6mm and the offset is 42mm.
What other years of Pontiac G5 have the same bolt pattern as the 2007?
The Pontiac G5 uses the 4x100 pattern from 2007 through 2009. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
What does 42mm offset mean for the 2007 G5?
An offset of 42mm means the wheel's mounting surface is 42mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Pontiac.
Will wheels from another Pontiac fit my 2007 G5?
Only if they share the exact same 4x100 bolt pattern, a compatible offset, and a center bore equal to or larger than 56.6mm.
How do I measure the bolt pattern on my 2007 Pontiac?
The 2007 G5 uses a 4x100 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I use spacers on my 2007 Pontiac G5?
Yes, but ensure the wheel spacers match the 4x100 bolt pattern and 56.6mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Pontiac G5 is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2007-2009 (3 model years).
- Observed bolt-pattern variants: 1 (4x100).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2007 Pontiac G5, please report it via our About page contact so we can verify and update this record.