1999 Daewoo Lanos Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1999 Daewoo Lanos, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 4x100
Lug Nut / Bolt Size B 12x1.50
Center Bore (CB) 56.6 mm
Offset (ET) 46
Torque Specs 80 ft-lbs (108 Nm)

1999 Lanos — Year-Specific Fitment Context

The 1999 model year marks the beginning of the Daewoo Lanos's 4x100 bolt pattern era, which continued through 2002 (4 consecutive years). Wheels from any 1999–2002 Daewoo Lanos are cross-compatible with the 1999 model.

Daewoo Lanos Bolt Pattern by Year

The table below shows how the Lanos's wheel specifications have changed over the years. The 1999 model year is highlighted.

Year Bolt Pattern Center Bore Offset
▸ 1999 4x100 56.6 46
2000 4x100 56.6 46
2001 4x100 56.6 46
2002 4x100 56.6 46

4x100 Pattern Context

This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.

Examples of other vehicles using 4x100:

Expert Buying Guide for 1999 Daewoo Lanos

For your 1999 Daewoo Lanos, the 4x100 bolt pattern and 56.6mm center bore are critical. Aftermarket wheels often have a larger center bore, so hub-centric rings (56.6mm ID to wheel's bore) are mandatory to prevent vibration and ensure load is on the hub, not the lugs. The offset is sensitive: stock is 46mm. Sticking within ±5mm is safe; lower offset pushes wheels outward, risking fender rub and bearing stress. Always use the correct lug nuts: 12x1.50 thread pitch with a conical (60-degree) seat. Flat or ball seats are unsafe. Re-torque after 50-100 miles. Avoid spacers unless hub-centric and properly installed.

Historical Fitment Data Reference

In our dataset, Daewoo Lanos appears from 1999 to 2002 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.

  • Observed bolt-pattern variants for this model: 1
  • Observed center-bore variants for this model: 1
  • Observed lug-size variants for this model: 1
  • Observed total offset span across years: 0.0 mm

Quick Tips & Safety Warnings

Ready to upgrade or perform maintenance?

🛒 Shop Tools & Accessories on Amazon

As an Amazon Associate, I earn from qualifying purchases.

1999 Daewoo Lanos — Frequently Asked Questions

What is the bolt pattern for a 1999 Daewoo Lanos?

The 1999 Daewoo Lanos uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.6mm and the offset is 46mm.

What other years of Daewoo Lanos have the same bolt pattern as the 1999?

The Daewoo Lanos uses the 4x100 pattern from 1999 through 2002. Wheels from any of these model years are dimensionally compatible with the 1999, provided the offset and center bore also match.

Will wheels from another Daewoo fit my 1999 Lanos?

Only if they share the exact same 4x100 bolt pattern, a compatible offset, and a center bore equal to or larger than 56.6mm.

Why is matching the 56.6mm center bore important for the 1999 Lanos?

The 56.6mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.

How tight should I torque the lug nuts on a 1999 Daewoo Lanos?

Refer to your owner's manual for exact specs, but always tighten the B 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.

What is the factory wheel offset for a 1999 Daewoo Lanos?

The OEM offset for the 1999 Lanos is typically around 46mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.

Need more vehicle fitment data?

Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.

Get the Full Dataset
Confidence Level
High
Verified Source
Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last Updated
2026-07-08

Daewoo Lanos By Year

1999 2000 2001 2002

Other Daewoo Models

Lanos Leganza Nubira