1992 Pontiac LeMans Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1992 Pontiac LeMans, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | M12x1.5 |
| Center Bore (CB) | 56.6 mm |
| Offset (ET) | 35-45mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
1992 LeMans — Year-Specific Fitment Context
The 1992 model year marks the beginning of the Pontiac LeMans's 4x100 bolt pattern era, which continued through 1993 (2 consecutive years). Wheels from any 1992–1993 Pontiac LeMans are cross-compatible with the 1992 model.
Pontiac LeMans Bolt Pattern by Year
The table below shows how the LeMans's wheel specifications have changed over the years. The 1992 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 1992 | 4x100 | 56.6 | 35-45mm |
| 1993 | 4x100 | 56.6 | 35-45mm |
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
Expert Buying Guide for 1992 Pontiac LeMans
For your 1992 Pontiac LeMans, the 4x100 bolt pattern and 56.6mm center bore are critical. Aftermarket wheels often have a larger center bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. The offset range is 35-45mm; deviations can cause rubbing or clearance issues. Always use M12x1.5 lug nuts with the correct seat type (cone or ball) to match your wheels. Improper seating can lead to wheel loosening. Verify that aftermarket wheels are hub-centric or use rings, and check offset carefully to maintain safe handling.
Historical Fitment Data Reference
In our dataset, Pontiac LeMans appears from 1992 to 1993 (2 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ If using aftermarket wheels, confirm they are hub-centric or install hub-centric rings to match the 56.6mm bore.
- ✅ Avoid wheels with offset below 35mm or above 45mm to prevent rubbing on suspension or fenders.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1992 Pontiac LeMans — Frequently Asked Questions
What is the bolt pattern for a 1992 Pontiac LeMans?
The 1992 Pontiac LeMans uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.6mm and the offset is 35-45mmmm.
What other years of Pontiac LeMans have the same bolt pattern as the 1992?
The Pontiac LeMans uses the 4x100 pattern from 1992 through 1993. Wheels from any of these model years are dimensionally compatible with the 1992, provided the offset and center bore also match.
What lug nut size does the 1992 Pontiac LeMans use?
The 1992 Pontiac LeMans uses M12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Do 1992 Pontiac LeManss use lug bolts or lug nuts?
The 1992 LeMans requires M12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How do I measure the bolt pattern on my 1992 Pontiac?
The 1992 LeMans uses a 4x100 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I use spacers on my 1992 Pontiac LeMans?
Yes, but ensure the wheel spacers match the 4x100 bolt pattern and 56.6mm center bore. Also verify that you have enough thread engagement for your M12x1.5 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset