2002 Daewoo Lanos Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2002 Daewoo Lanos, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | B 12x1.50 |
| Center Bore (CB) | 56.6 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2002 Lanos — Year-Specific Fitment Context
The 2002 model year is the final year of the Daewoo Lanos's 4x100 bolt pattern run (since 1999). Wheels from any 1999–2002 Daewoo Lanos are cross-compatible with the 2002 model.
Daewoo Lanos Bolt Pattern by Year
The table below shows how the Lanos's wheel specifications have changed over the years. The 2002 model year is highlighted.
Fitment Notes
The 2002 Daewoo Lanos has a bolt pattern of 4x100.
This means it is a 4 lug pattern with a circle diameter of 100mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Daewoo Lanos appears from 1999 to 2002 (4 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
2002 Daewoo Lanos — Frequently Asked Questions
What is the bolt pattern for a 2002 Daewoo Lanos?
The 2002 Daewoo Lanos uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.6mm and the offset is 46mm.
What other years of Daewoo Lanos have the same bolt pattern as the 2002?
The Daewoo Lanos uses the 4x100 pattern from 1999 through 2002. Wheels from any of these model years are dimensionally compatible with the 2002, provided the offset and center bore also match.
What is the factory wheel offset for a 2002 Daewoo Lanos?
The OEM offset for the 2002 Lanos is typically around 46mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the PCD for a 2002 Daewoo Lanos?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2002 Lanos, the PCD is 4x100.
Will wheels from another Daewoo fit my 2002 Lanos?
Only if they share the exact same 4x100 bolt pattern, a compatible offset, and a center bore equal to or larger than 56.6mm.
What is the center bore of a 2002 Daewoo Lanos?
The factory center bore (hub bore) for the 2002 Daewoo Lanos is 56.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Daewoo Lanos is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1999-2002 (4 model years).
- Observed bolt-pattern variants: 1 (4x100).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2002 Daewoo Lanos, please report it via our About page contact so we can verify and update this record.