2000 Daewoo Lanos Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 Daewoo Lanos, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | B 12x1.50 |
| Center Bore (CB) | 56.6 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2000 Lanos — Year-Specific Fitment Context
The 2000 Daewoo Lanos is in year 2 of 4 using the 4x100 pattern (1999–2002). Wheels from any 1999–2002 Daewoo Lanos are cross-compatible with the 2000 model.
Daewoo Lanos Bolt Pattern by Year
The table below shows how the Lanos's wheel specifications have changed over the years. The 2000 model year is highlighted.
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
Expert Buying Guide for 2000 Daewoo Lanos
The 2000 Daewoo Lanos uses a 4x100 bolt pattern with a 56.6mm center bore. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is critical: the factory spec is 46mm, but a range of 38–50mm is acceptable. Going lower (e.g., 35mm) may cause rubbing on the fender; higher (e.g., 52mm) risks brake caliper clearance. Always use the correct lug nuts: B 12x1.50 thread pitch with a conical (60-degree) or ball seat, matching the wheel's seat type. Never use acorn nuts on ball-seat wheels or vice versa. Re-torque after 50–100 miles.
Historical Fitment Data Reference
In our dataset, Daewoo Lanos appears from 1999 to 2002 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80–90 ft-lbs after 50–100 miles of driving.
- ✅ If using aftermarket wheels, verify that the wheel's hub bore is at least 56.6mm; use hub-centric rings if larger.
- ✅ Check offset carefully: 38–50mm is safe; lower offsets may require fender rolling or negative camber.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2000 Daewoo Lanos — Frequently Asked Questions
What is the bolt pattern for a 2000 Daewoo Lanos?
The 2000 Daewoo Lanos uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.6mm and the offset is 46mm.
What other years of Daewoo Lanos have the same bolt pattern as the 2000?
The Daewoo Lanos uses the 4x100 pattern from 1999 through 2002. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2000 Daewoo Lanos?
Absolutely. Just ensure the aftermarket wheels have a 4x100 bolt pattern, an offset near 46mm, and a center bore of at least 56.6mm (using hub rings if larger).
What is the factory wheel offset for a 2000 Daewoo Lanos?
The OEM offset for the 2000 Lanos is typically around 46mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What lug nut size does the 2000 Daewoo Lanos use?
The 2000 Daewoo Lanos uses B 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Will wheels from another Daewoo fit my 2000 Lanos?
Only if they share the exact same 4x100 bolt pattern, a compatible offset, and a center bore equal to or larger than 56.6mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset