2001 Daewoo Lanos Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2001 Daewoo Lanos, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | B 12x1.50 |
| Center Bore (CB) | 56.6 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2001 Lanos — Year-Specific Fitment Context
The 2001 Daewoo Lanos is in year 3 of 4 using the 4x100 pattern (1999–2002). Wheels from any 1999–2002 Daewoo Lanos are cross-compatible with the 2001 model.
Daewoo Lanos Bolt Pattern by Year
The table below shows how the Lanos's wheel specifications have changed over the years. The 2001 model year is highlighted.
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
Expert Buying Guide for 2001 Daewoo Lanos
For your 2001 Daewoo Lanos, the 4x100 bolt pattern is shared across 1999–2002 models, but critical dimensions vary. The center bore is 56.6mm—aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure load is on the hub, not the lug nuts. Offset is sensitive; the factory spec is 46mm. Deviating more than ±5mm may cause rubbing or poor handling. Always use lug nuts with the correct thread pitch (12x1.50) and seat type: the Lanos uses a conical (60-degree) seat. Never use ball-seat lug nuts, as they can loosen. Re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Daewoo Lanos appears from 1999 to 2002 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50 miles of driving.
- ✅ Avoid wheels with offset below 40mm or above 52mm to prevent rubbing or bearing damage.
- ✅ If using aftermarket wheels, always install hub-centric rings (56.6mm ID to wheel bore OD).
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2001 Daewoo Lanos — Frequently Asked Questions
What is the bolt pattern for a 2001 Daewoo Lanos?
The 2001 Daewoo Lanos uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.6mm and the offset is 46mm.
What other years of Daewoo Lanos have the same bolt pattern as the 2001?
The Daewoo Lanos uses the 4x100 pattern from 1999 through 2002. Wheels from any of these model years are dimensionally compatible with the 2001, provided the offset and center bore also match.
What is the factory wheel offset for a 2001 Daewoo Lanos?
The OEM offset for the 2001 Lanos is typically around 46mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I put aftermarket wheels on my 2001 Daewoo Lanos?
Absolutely. Just ensure the aftermarket wheels have a 4x100 bolt pattern, an offset near 46mm, and a center bore of at least 56.6mm (using hub rings if larger).
Do 2001 Daewoo Lanoss use lug bolts or lug nuts?
The 2001 Lanos requires B 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How do I measure the bolt pattern on my 2001 Daewoo?
The 2001 Lanos uses a 4x100 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset