2014 Dodge Dart Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2014 Dodge Dart, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x110 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 65.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2014 Dart — Year-Specific Fitment Context
The 2014 Dodge Dart is in year 2 of 4 using the 5x110 pattern (2013–2016). Wheels from any 2013–2016 Dodge Dart are cross-compatible with the 2014 model.
Dodge Dart Bolt Pattern by Year
The table below shows how the Dart's wheel specifications have changed over the years. The 2014 model year is highlighted.
5x110 Pattern Context
This bolt pattern appears on 126 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 5x110:
Expert Buying Guide for 2014 Dodge Dart
The 2014 Dodge Dart uses a 5x110 bolt pattern with a 65.1mm center bore. When upgrading to aftermarket wheels, hub-centric rings are essential to match the bore precisely, preventing vibrations and ensuring proper load distribution. The offset is sensitive; the factory spec is 45mm, but a range of 40-50mm is acceptable for most setups. Deviating significantly may cause rubbing or clearance issues. Always verify lug nut compatibility: the Dart requires 12x1.25 thread pitch with a conical (60-degree) seat. Using incorrect lug nuts can lead to wheel detachment. For safety, re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Dodge Dart appears from 2013 to 2016 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 ft-lbs after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels from non-2013-2016 Dodge Dart models; the 5x110 pattern is specific to this generation.
- ✅ Check brake caliper clearance when using wheels with offset below 40mm or above 50mm.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2014 Dodge Dart — Frequently Asked Questions
What is the bolt pattern for a 2014 Dodge Dart?
The 2014 Dodge Dart uses a 5x110 bolt pattern (also called lug pattern or PCD). The center bore is 65.1mm and the offset is 45mm.
What other years of Dodge Dart have the same bolt pattern as the 2014?
The Dodge Dart uses the 5x110 pattern from 2013 through 2016. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.
Will wheels from another Dodge fit my 2014 Dart?
Only if they share the exact same 5x110 bolt pattern, a compatible offset, and a center bore equal to or larger than 65.1mm.
How tight should I torque the lug nuts on a 2014 Dodge Dart?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the PCD for a 2014 Dodge Dart?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2014 Dart, the PCD is 5x110.
How do I measure the bolt pattern on my 2014 Dodge?
The 2014 Dart uses a 5x110 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset